Good product not good quality control on pin length.
Posted November 1, 2013
Great shelf pin, like the tips the only issue is pins vary in length this is a issue when shelve are side to side in cabinets when to long will not sit flush to side. You must drill extra deep to avoid different lengths.
I have no problem with these...
Posted May 22, 2011
I have no problem with these Shelg Supports as I have used them many times.
The pins are nice for the...
Posted May 16, 2010
The pins are nice for the pads on them but they have a small shoulder at the base of the peg that is over size. The location of the pin holes makes it imposssible to redrill or counter sink. I have to alter all the shelves by an 1/8". Bummer
These shelf supports are good. Great...
Posted May 15, 2010
These shelf supports are good. Great for glass shelves.I did however find the pin too long. They should be only 3/8" or less even. I made a cabinet with a center section that was 3/4" thick. The supports hit each other and would not go in all the way.
I used these shelf pins for...
Posted March 18, 2010
I used these shelf pins for cabinets I made for my woodshop. They work better than I had expected. The vinyl coating on the pins prevents the shelf from slipping or sliding around. I would recommend their use on any cabinets that you might want to adjust from time to time.