Freud® 10" x 40T Premier Fusion Thin Kerf General Purpose Saw Blade - P410T  Zoom

Freud® 10" x 40T Premier Fusion Thin Kerf General Purpose Saw Blade - P410T

Item #: 30948
$79.97
Each In Stock

Overview

Freud engineers have discovered the ultimate combination of fused tooth grind geometry, blade body rigidity, precise tensioning, a special carbide blend and superior carbide brazing, non-stick Perma-SHIELD® coating and high performance anti-vibration - all working together in concert to provide the ultimate cut. One blade does it all. Whether you're ripping or crosscutting, a Premier Fusion blade will tackle any project. Thin kerf blades remove less material than standard carbide blades, thus requiring less horsepower to produce equally good results.

The Perma-SHIELD® coating covers the blade plate and cutting edge in a protective layer, reducing heat build-up. Perma-SHIELD® blades resist binding in large volume cutting, reducing subsequent blade warp. The coating lubricates the blade, allowing it to spin freely, and eliminates pitch and debris build-up on the blade.

Also available as a standard kerf blade.


Technical Details

  • Laser-cut anti-vibration slots drastically reduce vibration and sideways movement in the cut - extending blade life, and giving a crisp, swirl-free flawless finish
  • The combination of unique design and special polymer filler in the anti-vibration slots reduces vibration above and beyond any other blade, resulting in superior performance
  • Unique side grind polishes the material to produce a superior finish
  • No stabilizers needed
  • Perma-SHIELD® Non-Stick Coating is a state-of-the-art coating formulation that is superior to any today, and will withstand the toughest woodworking applications. Like Silver I.C.E.™, Perma-SHIELD® eliminates pitch and debris build-up reducing down time for cleaning
  • Features Ti-Co™ Hi-Density Carbide General Purpose Blend for maximum performance
  • Thin kerf allows for easier feeding and reduced waste

One Freud Premier Fusion Thin Kerf Saw Blade

Specifications

Tech Spec

Brand Freud
Manufacturer Part Number P410T
Weight (lbs) 1.6900
Kerf Width 0.091"
Saw Blade Diameter 10"
Material Cutting Chipboard, Laminate, Plywood, Wood
Number of Teeth 40

What's included:


One Freud Premier Fusion Thin Kerf Saw Blade

Reviews

Customer Reviews

9 Review(s)

View All

Terrific all purpose blade

Daniel Posted November 20, 2014
When I got a fine new chop saw, I changed my tablesaw blade to a rip blade (from Freud). Worked great, but there were crosscuts I still had to make (ones too wide for the Kapex). They were okay, but not great. Then I saw this blade and decided to try it. Super. Great rips, great crosscuts. Very reasonable price.

Best Combination Blade for a great price!

Timber Tailor Posted July 8, 2014
I bought this blade for a custom solid wood kitchen project. I had my doubts about a 40 tooth blade being able to leave a clean cut miter but I had been impressed with the router bit sets I recently used and thought I would give the Premier Fusion 10" blade a try.

Once I dialed in the fence and the blade to one another and to the table surface, I have never removed this blade from the table saw. It is THAT good. In matter of fact, it is so good that I rarely use my jointer any more. It cuts such a straight and clean rip that they are ready to glue up straight off the table saw.

And as for miter cuts on the table saw, I have found my blade. I use the Freud in combination with an Osbourne EB-2 and have never had any tear out with cuts so clean that jointery is now done with precision. I even cut some melamine for a RAS table top and was really impressed with how clean the edges were. I was sure there would be some tear out but I was proven wrong.

This blade is absolutely outstanding. I...

Evan M from Canberra, Australia, Australia Posted November 23, 2012
This blade is absolutely outstanding. I have used a number of blades but nothing even comes close to the incredible perfection of the cut this provides. Rips and crosses are absolutely polished. I made up a "quick" box and a table saw jig one afternoon to test the new blade. I was astonished that I did not have to sand at all - it was truly finished. The edges were PERFECT. I give this blade 6 out of 5 Stars and unconditionally recommend it to anyone considering an almost universal timber blade. I gave this review as I came to get another one, as a spare. I will not be using any of my others from now on and wanted the spare for/if/when it has to go to the shop for a sharpen.

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Videos

  • Freud Premier Fusion Saw Blades

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012
Feedback X