Overview
These smooth-rolling casters support up to 240 lbs. each and come in five unique styles. Soft-yet-resiliant polyurethane wheels ride easily on everything from concrete to carpet and effortlessly skim over cracks, cords and other small obstacles. Perfect for mobilizing furniture, shop stands, equipment and more. Sold in pairs.
Available styles:
- Rigid (Plate Mount)
- Swivel (Stem Mount)
- Swivel (Plate Mount)
- Total-Lock Swivel (Stem Mount)
- Total-Lock Swivel (Plate Mount) (Shown above)
Each caster features a 3" diameter, 1-3/16" wide wheel and a cold-rolled, zinc-plated steel body. Overall height is 4".
Rigid Casters:
- Allow for smooth and stable straight-line movement.
- Often used as the rear pair in a four-caster system.
Swivel Casters:
- Provides smooth and quiet 360° rotation with sealed ball bearing swivel.
- Highly maneuverable.
Total-Lock Swivel Casters:
- Foot-brake locks both wheel and swivel for stable stationary setups.
- Quick-release foot lever comes standard.
Specifications:
- Overall width: 2-3/8"
- Plate size (plate mount casters only): 2-5/8" x 3-3/4" x 1/8"
- Stem size (stem mount casters only): 1" long , 1/2" diameter, 13 threads/in.
- Stem casters include locking nut
Tech Spec
Reviews
Average Score:
3.9/5I bought 4 of these (stem-mount)...
Posted August 26, 2013
I bought 4 of these (stem-mount) about three years ago, to use on a clamp dolly I built. I was very happy with them until today, when the polyurethane outer wheel just went to pieces on one of them. All four are loaded at at-most 1/2 their rated weight. The floor they roll on is hard and smooth. /p>
Without a doubt the best looking...
Posted August 8, 2012
Without a doubt the best looking looking and performing caster that I have run into. I purchased the casters based on how it looked in the catalogue and the reputation of Rockler. I guess you may say I took chance and was not disappointed in the least.
I used four of these casters...
Posted July 9, 2012
I used four of these casters on a shopmade router table cabinet, and would never use them again. Every single time I attempt to move the cabinet, the two wheels on the the side furthest away from the push/pull force always decide to set themselves at about a 30 degree angle from the direction I am trying to move the cabinet. The result is that I have to exert considerable sideways force to get the cabinet to travel the direction I want. This is very annoying.
These are great casters and I...
Posted April 20, 2011
These are great casters and I would have given them a 5 rating, but the specification says that the overall height is 4". After mounting two swivel plate casters, p/n 33868, I find that the total height is 4 1/8", not 4 inches.I bought two to retrofit a 6 ft long workbench that I built over 10 years ago. This bench sagged about an eight of an inch, and I bought these to get the bench back to level. Now I will have to shim up the original four casters by 1/8 inch. I'm not pleased about that.
I used six of the swivel...
Posted January 22, 2011
I used six of the swivel mount casters on a 6'x2-1/2' homemade base to a cabinet in which I store my LPs and CDs. There are more than 500 of each and the aggregate weight on the base exceeds one-half ton. Previous casters crumbled and gave out after but short use. These from Rockler have not only borne the weight but, on a carpeted surface, they nicely swivel and permit movement of the cabinet as needed.
Videos
You may also like
Swipe to see more
