Did the Job for a Simple Utility Cabinet
Posted September 14, 2014
I got this for a simple garage utility cabinet made primarily out of 3/4 ply, with 1/4 ply doors. For the tracks, I used a dado blade at 13/16th and then JB Weld Epoxy to glue them in. (Did not use brads to tack it down; didn't want nails to potentially interfere with smooth sliding.) Also, added some paste wax to the door tops/bottoms. The product works well. It's all fairly simple. It does get very cold in that part of garage in winter, so we'll see how the material holds up after a few years of potential freeze and summer cycles.
Worked great, very easy to work with
Posted April 30, 2014
Appropriately sized rabbets in the top and bottom of the cabinet case and glued the tracks in. Worked beautifully. I used quarter inch ply for the sliding doors and they slide very smoothly with no binding. I built one cabinet for the garage with these, now I'm going to order two more sets for more cabinets.
This is a great product that...
Posted February 1, 2012
This is a great product that is easy to work with. My only complaint is that you have to drill your own mounting holes and recess the heads of the tiny screws so the glass/lexan can pass freely. Next time I would try to glue them in place.