Compact footprint makes it easy to store � simply hang it from a nail by your saw!  Zoom

Rockler 45 Degree Miter Sled

Item #: 31593
$25.99
Each In Stock

Overview

Perfect miters - no adjustments! Simply cut one piece on the leading face, one on the trailing face, and voila! Since both pieces reference off a perfect 90&deg angle, the miters will fit perfectly.

  • Pre-installed adjustable nylon pins provide a no-slop fit to the miter track.
  • Through-slots in the base allow you to securely clamp moldings at table level.
  • Can be easily drilled to add extended fences and stops.
  • High-impact polycarbonate ensures durability and low-friction sliding.
  • Fits a standard 3/8" x 3/4" miter slot.
  • Measures 5-1/2" in width and 10-3/8" in length. Clamping faces are 7-1/2" long.
Related articles

Tech Spec

Brand Rockler
Manufacturer Part Number 45 MITER SLED
Weight (lbs) 0.7200

Technical Downloads:

Reviews

Customer Reviews

88 Review(s)

View All

Easy and convenient to use

Benjamin Posted December 1, 2014
Simple is good and this simple jig is a quick fix for making my picture frames. I keep it in the cabinet drawer under my table saw extension table for easy and frequent access

Before I used my miter sled...

Terry W from Oklahoma City, OK Posted February 10, 2012
Before I used my miter sled ..I masked off 3 1/2 " wide "Pads" on the miter rail on the back side ...not the screw side then applied JB Weld to each of those masked areas . After it set up hard I took a flat file and fitted it to my miter slot in my saw ... This works great ...Its very easy to get an exact tight fit and still smooth and easy to slide... and as it wears later I can still bring the screws out ever so slightly to make those adjustments.

I found it easy to use...

Andrew B from Williston, VT Posted May 31, 2011
I found it easy to use and great when I need perfect 45's.It saved my bacon on one recent project.Problems- The plastic set screws used to tighten up the slid in the slot allow you to make not quite 45's although the combined angle is still 90 degrees- The set screws are soft and will wear.- The plastic surface was slippery. Solved this by gluing sandpaper to the surface.

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Videos

  • 45 Degree Miter Sled

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012
Feedback X