Also available 6 Foot CD Holder Strip
FREE downloadable CD/DVD Tower Plan
These 6' holder strips allow you maximum flexibility for DVD storage. Can be used for either vertical or drawer-installed applications. They can easily be cut to length! Double-stick tape (included) makes installation a snap. Two adjacent strips are needed to hold one row of DVDs. Two 6' strips will hold 76 DVDs. One strip cut in half holds 37 DVDs.
Minimum cabinet depth of 3-3/4' required for clearance.
NOTE: "The 'double-sided tape' included with this item is actually an "A-T-T", or "Adhesive Transfer Tape". The tape is a thin bead of adhesive sandwiched between a carrier strip and a cover strip. To use, peel the cover strip off of one side, then press the adhesive bead onto the CD strip and burnish it so that the adhesive bonds to the CD strip. Then peel away the remaining carrier strip, leaving only the bead of adhesive on the CD strip (the adhesive has now been "transferred"). Then just stick the CD-strip-with-adhesive to the side of the cabinet. Make sure your cabinet finish is completely cured.
|Manufacturer Part Number||4408-0002|
11 Review(s)View All
I used this product on an...Posted November 27, 2010
This product works just fine for...Posted February 18, 2011
My experience is the same as...Posted October 8, 2009