Overview
Resaw guides provide a higher level of control when adjusting for band saw blade drift. Curved face of the guide helps steer board into the cut. Easily attaches to the face of the band saw fence. This 7" Resaw Guide is designed for larger capacity band saws. Use with Kreg Precision Band Saw Fence (#26186, sold separately).
Features:
- Incredibly durable anodized aluminum
- 7" Tall for large sized workpieces
- Actively compensate for blade drift
What's included
(1) 7'' Resaw Guide for Kreg Band Saw Fence
Technical Details
- Material: Durable Anodized Aluminum
- Height: 7"
- Brand: Kreg
- Manufacturer Part Number: KMS7214
- Weight (lbs): 0.9000
Product Warnings
WARNING This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product Technical Downloads
Frequently Bought Together
Questions and Answers
Start typing your question and we'll check if it was already asked and answered. Learn More
Reviews
5.0 / 5.0
1 Review
Simple, easy to use, but effective
I got this guide only a couple of days ago, and have used it several times since then. I attached it to my Jet 14" band saw and immediately found that the guide would not fit unless the upper blade guide was removed. That had little or no effect on the operation.
It is essential to accurately set the guide absolutely parallel to the blade. Also, using a 1/2" wide blade makes it very easy to maintain a straight, even cut.
I am using the guide to re-saw 1 x 4 x 3/4 spruce into 5/16" slices for small boxes. It works like a charm. It takes me about one minute to split a piece 6" long. I also cut the occasional piece of 1 x 8 x 3/4.
I was previously doing my re-sawing on a table saw which could not cut stock more than 6-1/2" wide. With the guide I can go through a piece of 1 x 8 x 3/4 with a single pass, although it is the absolute maximum the saw will handle.
I have just ordered the shorter 4-1/2" re-saw guide which will let me reinstall the upper guide for cuts shorter than 6-1/2".
I highly recommend this little guide; it is well worth the money.
It is essential to accurately set the guide absolutely parallel to the blade. Also, using a 1/2" wide blade makes it very easy to maintain a straight, even cut.
I am using the guide to re-saw 1 x 4 x 3/4 spruce into 5/16" slices for small boxes. It works like a charm. It takes me about one minute to split a piece 6" long. I also cut the occasional piece of 1 x 8 x 3/4.
I was previously doing my re-sawing on a table saw which could not cut stock more than 6-1/2" wide. With the guide I can go through a piece of 1 x 8 x 3/4 with a single pass, although it is the absolute maximum the saw will handle.
I have just ordered the shorter 4-1/2" re-saw guide which will let me reinstall the upper guide for cuts shorter than 6-1/2".
I highly recommend this little guide; it is well worth the money.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
