Overview
Designed for face frame cabinets, these nickel-plated hinges offer a large 170° opening capacity for greater access to cabinet drawers and pullout shelves. Snap-closing action and clip-on assembly provide added performance and installation convenience. 35 mm hinge cup hole.
Related Products
We recommend using our JIG IT® Deluxe Concealed Hinge Drilling System with the JIG IT® Hinge Plate Template D to make installation of these hinges accurate and easy.
Questions and Answers
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 23 questions
Browse 23 questions
and 80 answers
Why did you choose this?
Rockler Store
closest hinge to what was put on 20 yrs ago
Vicki H
on Jun 21, 2017
Need my lazy Susan door to open further and this hinge seems to be good quality. We'll see.
Berenice C
on Jun 4, 2017
closest hinge to what was put on 20 yrs ago
Vicki H
on Jun 21, 2017
It ships in pairs and it looks like the hinges it will replace.
Wm. A. T
on Jun 17, 2017
My Thomasville cabinets came with Blum Hinges labeled "Austria 70.655 - 1.01" and "175L660 - 01.22". Will this #23554 hinge work?
170 +/- degree hinge for a 1-1/2" overlay condition. Help! I bought this hinge to improve the opening swing on a set of double cabinet doors. Unfortunately the doors overlay the face frame at each side by a full 1-1/2". These are factory made cabinets of good quality purchased from a major home improvement store - that store's cabinet department doesn't seem to understand the issue. The largest offset (as I understand) of these hinges is 5/8" - is there a known 170-degree hinge that has the mechanics and geometry to work with a face frame overlay of 1-1/2"?
Thanks for any help you can offer.
Thanks for any help you can offer.
What is weight limit on this hinge?
BEST ANSWER: Check Blum product literature on the internet for this. They will at least recommend the number of hinges you should use for a particular door size. The doors in question are usually 3/4 inches thick kitchen or bathroom doors made out of wood or MDF.
- Reply
- Inaccurate
- Hal S on Oct 1, 2015
I have installed the 170 hinges, but when I close both doors, the doors are too close and touch. By closing them at the same time I can get them shut. Is there an adjustment to move the door on the hinge?
BEST ANSWER: When you turn the Phillips bolt at the rear of the hinge you can get the door to move approximately 1/4 inch in either direction. Up and down movement is controlled by a bolt that is hard to see inside the hinge body.
- Reply
- Inaccurate
- Michael J on Jun 24, 2015
- Purchased on Nov 11, 2014
My hinge says 70.655 is this the correct replacement?
when using the blum 170 degree hinge, what is the minimum distance needed between adjacent cabnet door?
My existing cabinet has 110 degree face frame clip hinges. I want to switch to 170 degree. Can I use existing hinge cup holes to install the 170 degree clip hinge?
BEST ANSWER: Yes. In my cabinet-door drill set-up, holes for every european-sytle hinge is drilled 7/8" from door edge.
- Reply
- Inaccurate
- Michael J on Nov 11, 2016
- Purchased on Mar 30, 2015
Is the 23554 170degree slow close?
When it is stated that the hinges are "sold in pairs", does that mean that "door part A" and "cabinet part B" constitute a "pair"? Or are there two complete hinges included in the sell price?
BEST ANSWER: What is shown in the picture is one hinge, composed of two parts. I received two hinges with my order.
- Reply
- Inaccurate
- katrina o on Aug 10, 2015
- Purchased on Apr 4, 2015
do I have to make a hole in the door frame to mount that part of the hinge?
BEST ANSWER: Yes, I purchased a drill jig just for that. I pre hung all the doors prior to putting the finish on them.
- Reply
- Inaccurate
- Jason T on Apr 29, 2017
- Purchased on May 18, 2015
The hinge mounting plate (for 170 degree face frame) is attached with two screws to cabinet face frame. Is this sufficient to hold hinge? The other end of plate does not attach to anything? Is a mounting block needed?
BEST ANSWER: Phil,
Yes it is sufficient to hold the hinge to the face frame. The other end of the hinge attaches to the door. Hope I understood your question correctly
Yes it is sufficient to hold the hinge to the face frame. The other end of the hinge attaches to the door. Hope I understood your question correctly
- Reply
- Inaccurate
- John U on Nov 11, 2016
- Purchased on Mar 23, 2015
Can hinges be repaired to spring back ,,?
BEST ANSWER: No they can not be modified.
- Reply
- Inaccurate
- Robert R on Jul 31, 2016
- Purchased on Mar 4, 2015
need directions for 170 face frame Blum hinge. not came with hinges. Do I need to use back up blocks? Or can it be mouted on the end of the face frame as shown in photo above. Thank you.
BEST ANSWER: They can be mounted directly on the face frame as shown
- Reply
- Inaccurate
- Craig N on Jul 5, 2016
- Purchased on Apr 4, 2015
How many hinges for 96" tall X 21" wide, 3/4" thick cabinet door?
BEST ANSWER: At least 4 depending on weight of the door.
- Reply
- Inaccurate
- John K on Feb 2, 2016
- Purchased on Mar 25, 2015
I purchased the Blum 175L660-01.22 from another site and they arrived locked. I cannot find instructions on how to open them anywhere...can anyone help?
BEST ANSWER: Attach them to a scrap or door, you just need some leverage to open them
- Reply
- Inaccurate
- Craig N on Oct 29, 2015
- Purchased on Apr 4, 2015
Can you tell me if Item #: 23554 will work for an Armstrong full overlay cabinet?
BEST ANSWER: It should work on this type of cabinet, but I would suggest you try one hinge first and if it works order what you need.
- Reply
- Inaccurate
- Daniel J on May 1, 2017
- Purchased on May 25, 2015
What hinge do you think would work on a opening wine barrel ?
BEST ANSWER: These are meant to be attached vertically to a face frame. If your wine barrel opens horizontally...like a chest...I would advise against this type of hinge.
- Reply
- Inaccurate
- Michael G on Apr 13, 2017
- Purchased on Apr 20, 2015
Will this hinge allow for sliding drawers within the cabinet base to slide out and not hit the inside edge of the open door frame?
My cabinets have the 170 degree blum hinges. How do I separate the hinge to remove the door from the cabinet?
BEST ANSWER: Don't separate the hinge...unscrew it from the cabinet and or the door. You may damage the hinge of you separate / take it apart.
- Reply
- Inaccurate
- Christopher C on Jan 15, 2017
- Purchased on Mar 11, 2015
I ordered the hinge # 33600 110 degree opening 3/8-5/8. It would be perfect but I needed 170 degree. Can you tell me if you have that?
BEST ANSWER: The 23554 hinge in this offer is a 170 degree opening hinge and is for overlays of 7/16", 1/2" or 5/8".
- Reply
- Inaccurate
- Steve Staff on Apr 21, 2015
I have face frame cabinets with full overly doors right next to another. There is very little space between the two doors. What kind of hinge can I use?
Will Blum 170 degree hinges work on IKEA's Billy cabinets/Oxberg doors?
Reviews
4.8 / 5.0
64 Reviews
I bought these at the Cambridge...
I bought these at the Cambridge MA store. They were for a 24in kitchen cabinet right over the dishwasher. The original 100 deg hinges made it impossible to reach the cabinet from the sink side of the dishwasher poor planning on the part of the kitchen designer. These hinges were a drop in and allow the door to swing totally out of the way so that we can empty the dishwasher and put dishes right into the cabinet. These were so easy to install. My only complaint is that they came packed in sets of two and I needed 3 hinges so I had to buy an extra.
- Was this review helpful? Yes (5) No (0)
- Flag as Inappropriate
September 28, 2010
- Was this review helpful? Yes (5) No (0)
- Flag as Inappropriate
Just installed my 170 degree hinges...
Just installed my 170 degree hinges and the Blum Bi-fold hinges on my Lazy Susan doors. These hinges were easy to install and to adjust. The doors worked perfectly with just a few simple adjustments. GREAT HINGES!!!
- Was this review helpful? Yes (3) No (0)
- Flag as Inappropriate
August 24, 2011
- Was this review helpful? Yes (3) No (0)
- Flag as Inappropriate
Hinge is excellent but to be...
Hinge is excellent but to be used in my cabinet to replace a 110 deg. hinge was possible since the protrusion of the hinge inside of the cabinet interfered with the Lazy Susan shelving. I did not want to make more holes in the door.
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
February 19, 2010
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
I was on a quest to...
I was on a quest to find a replacement for my corner cabinet 170 degree hinges. I found the Rockler site and it was a fete de compli. Thanks Rockler for saving the day. Five Stars all the way!
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
August 1, 2011
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
These hinges are wonderful
The 170° opening is a great solution for a wide door where you want complete access to shelves and a 100° door would be in the way. I have used these twice for such applications and bought an extra set since I knew I would want to use that type hinge again.
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
January 17, 2015
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
Blum 170 degree hinge
Replaced broken hinges. Fit and worked perfectly. Would buy again
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
I almost gave up trying to...
I almost gave up trying to replace two sets of hinges in my kitchen. Then, I found the Rockler website. I was able to use the photo's to perfectly match the broken hinges. I got ready for an entire day project, I was finished in 15-20 minutes! Both sets of doors work perfectly, and I agree with Craig that the quality seems much better than the originals. I have completed two other projects by using the Rockler website. It is on top of my Favorites list now!!
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
April 6, 2011
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
I needed these 170 Degree face...
I needed these 170 Degree face frame hinges for replacements for broken ones on my Lazy Susan doors.They worked perfect and seem to better better quality than the origional one that broke.
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
February 18, 2011
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
These hinges are an absolute dream...
These hinges are an absolute dream to work with. They are so forgiving with adjustment up/down, sideways and in/out. Using these hinges on a pie-corner door was a concern, but no problem, a slight adjustment and the doors work great.
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
August 18, 2009
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
Love the 170 degree opening!
Have a cupboard that 90 degree doors just do not allow good access. These hinges solved that.
The only problem I had was the fact that the screw holes from the old hinges did not line up with these new hinges. A few hardwood dowels and some wood glue solved that problem. Would definitely recommend these Blum hinges.
The only problem I had was the fact that the screw holes from the old hinges did not line up with these new hinges. A few hardwood dowels and some wood glue solved that problem. Would definitely recommend these Blum hinges.
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
