Overview
Specifically designed for use with face frames. These fully concealed 35mm face frame hinges offer 3-way cam adjustments for height, side, and depth (#90788 offers only two adjustments). See optional Blumotion Soft Close System for silent and cushioned door closure.
Related Products
We recommend using our JIG IT® Deluxe Concealed Hinge Drilling System with the JIG IT® Hinge Plate Template C to make installation of these hinges accurate and easy.
Questions and Answers
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 28 questions
Browse 28 questions
and 79 answers
Why did you choose this?
Rockler Store
I like working with them
Mark H
on Apr 14, 2018
Project
Kenneth R S
on Apr 3, 2018
I like working with them
Mark H
on Apr 14, 2018
replacement item.
Timothy E
on Apr 10, 2018
will this hinge replace the grass 860 hinge for a cabinet door?
Hi, I got the jig it deluxe concealed hinge drilling system. How do the holes in the guide (3-4-5-11mm) compare to the hinges that say 3/8 1/2 3/4" overlay...? Thank you!
Blum® Nickel-Plated Face Frame Overlay Hinges
BEST ANSWER: The numbers on the guide are indicators to the tab. The tab is the amount of material between the edge of the door and the start of the hinge pocket. For the compact hinges it is usually 3 mm.
Make sure you check the instructions for the hinges before you start.
Make sure you check the instructions for the hinges before you start.
- Reply(1)
- Inaccurate
- Rick H Staff on Oct 7, 2015
Is there a way to limit the range of motion with these hinges so they cabinet doesn't open as far?
BEST ANSWER: No, none that I am aware of...
- Reply
- Inaccurate
- Paul M on Aug 31, 2016
- Purchased on Sep 14, 2014
I have cabinets with 3/8" inset doors and would like to replace the existing semi-concealed hinges with concealed euro hinges. Will this hinge work for this application?
BEST ANSWER: Sorry no, if you have a 3/8" inset lipped door edge you would need to use http://www.rockler.com/salice-hinge-and-plate-for-3-8-lipped-face-frame-doors
- Reply(1)
- Inaccurate
- Steve Staff on Jul 8, 2016
I need 5/8" Overlay for my face frame cabinet doors. I would like to use the model number 90788 concealed hinge that you carry will this work? It says vairable ovelay from 1" to 3/8" in the description is this correct?
BEST ANSWER: That model may work for you but I would not guarantee it. I am a Rockler customer but they have a limited selection of blum hinges. I would recommend part number BH130.1100.26 for the 5/8 mounting plate. p/n BH33.3600 for the hinge. You may have to do a search for these part numbers. I hope this will help you.
- Reply
- Inaccurate
- David G on May 15, 2015
- Purchased on Apr 16, 2015
I currently have kitchen cabinets with 5/16" series 1 110 overlay concealed cabinet hinge, wraparound. This is a blum hinge and some are starting to fail. It appears that blum no longer sells the wraparound hinge and says to use compact 33 edge. Can you tell me what hinge I should be purchasing ?
The part of the hinge that attaches to the face frame, how wide is it? The distance from the edge of my face frame to the edge of my pullout drawer box that I installed is 5/16 of an inch. Will the hinge get in the way of the pull out drawer box. Thanks.
BEST ANSWER: By asking the width infers the distance across the face perpendicular to the screw holes. That distance is 1 1/4 in. However, I am pretty sure you want the distance the hinge stands out from the edge of the face frame. That distance is 3/8 in. not including the snap-on cover that can be left off.
- Reply
- Inaccurate
- Dannie M on Mar 7, 2018
- Purchased on Mar 5, 2016
I have the 3/4" thick cabinet doors. and they have a profile around the edge. How far back does the cup hole need to be from the door edge? If less than approx 4mm then the hole looks like it will cut thru the door at the profile. Thanks
BEST ANSWER: 3mm at the closest point. The depth is 11mm, which is just slightly less than 7/16". I believe these are pretty standard numbers for these types of hinges.
- Reply(1)
- Inaccurate
- James M on Feb 1, 2016
- Purchased on Apr 17, 2015
Is there a soft close snap on option?
BEST ANSWER: I do not believe that is an option. I looked on their online catalog and did not see any.
- Reply(1)
- Inaccurate
- THOMAS A on Feb 13, 2018
- Purchased on Feb 27, 2016
Does the 1/2" overlay mean that the cabinet door will overlay the face frame by 1/2" on the hinge side?
BEST ANSWER: yes normally if you want a half inch overlay you make the door 1 inch larger so you have a half inch all the way around
- Reply
- Inaccurate
- Paul A on Apr 30, 2015
- Purchased on Apr 6, 2015
how for from the door edge do I drill the hinge cup hole for 1/2" overlay?
BEST ANSWER: The "tab" for item 55910 is 3mm.
Complete installation instructions and drawings are available in the 'Technical Downloads" section of the product listing.
Complete installation instructions and drawings are available in the 'Technical Downloads" section of the product listing.
- Reply
- Inaccurate
- David Staff on Apr 3, 2018
what degree do these hinges open?
BEST ANSWER: This hinge opens to 105 degrees.
- Reply
- Inaccurate
- Ronald C on Feb 12, 2018
- Purchased on Feb 19, 2016
Does the Blum 1/2 " 55901 have the same distance from center of the hinge to edge of door as the Blum 3/8" 55902? I have built a jig that I am hoping I can reuse for placing the hole in the door. I know the diameter is the same.
What's the minimum stile width I need for a 1/2 inch overlay Blum hinge (# 55910)?
can you identify the Blum hinge that I need that has the following numbers on it - 30310 11.02, 26 DC, PA66, 5/8" screw and do you have it is stock? Jerry
BEST ANSWER: that would be item #90788. The variable overlay snap closed hinge
- Reply
- Inaccurate
- Rick H Staff on May 23, 2017
We need to replace our hinges. The info is: Blum 30.310-11.02. We need 24. Another number on the hinge is 11A?
BEST ANSWER: I've bought several,and have been satisfied with them each time.
- Reply
- Inaccurate
- SHIG T on May 1, 2017
- Purchased on Jan 9, 2015
How many hinges do I need per door for a door 58" tall and 14" wide...2" maple stiles and rails with 3/16" glass panels?
BEST ANSWER: You could possibly get by with 3 hinges since you have maple stiles which should hold the screws nicely. With a softer wood I would go with 4.
- Reply
- Inaccurate
- RICHARD S on Apr 17, 2017
- Purchased on Apr 30, 2015
I have model 55910 1/2" overlay hinges. I have what I feel is a large gap between cabinet door and stile when closed. I tried adjusting tighter but door edge hits stile. Any suggestions to close gap?
BEST ANSWER: Not much you can do. It's just the way there designed. I started using the more expensive Blum hinges. More money but a much better design.
- Reply
- Inaccurate
- Joseph B on Feb 14, 2017
- Purchased on Apr 19, 2015
I'm using 2 35mm Face Frame Overlay Hinges (part # 90788) to mount 16" (wide) x 34" (tall) door. How far from the door edge do I need to drill my offset holes? The hinges came with no specs.
BEST ANSWER: Instructions are linked in the Technical Downloads section of this web offer.
- Reply
- Inaccurate
- Steve Staff on Oct 10, 2016
What is the distance (center to center) between the screw holes for the door?
BEST ANSWER: the distance between hole on the door is 45mm
- Reply(1)
- Inaccurate
- Rick H Staff on Oct 6, 2016
I have 31329 1 1/4" overlay hinges. For ease of hanging door, it doesn't look like these come apart like some others. What is the best procedure for hanging the door? Install cup first? bracket first?
BEST ANSWER: I have tried both ways, and I think the best results happen when the cups are installed first. I have made spacers for the bottom of the door to make alignment easier. Good luck, Henry.
- Reply
- Inaccurate
- Michael F on Mar 5, 2016
- Purchased on Apr 20, 2015
does blum make anything bigger than 1-1/4 overlay have swollen doors and need little more gap for closing
BEST ANSWER: blum makes overlay hinges up to 1 9/16 and you can buy them at woodworkers hardware
- Reply
- Inaccurate
- gerald the wood butcher on Feb 28, 2016
- Purchased on Apr 12, 2015
What should I use to clean my 15 y/o self closing hinges to restore their self closing ability?
BEST ANSWER: Try using a silicone spray or something that doesn't leave a residue like electronic parts cleaner.
- Reply
- Inaccurate
- Travis H on Jan 7, 2016
- Purchased on Apr 27, 2015
The variable overlay hinges (90788) mount to the face of frame NOT the edge of the face frame correct?
BEST ANSWER: Yes hinge #90788 is mounted to the face of the face frame.
- Reply
- Inaccurate
- Rick H Staff on Apr 8, 2015
1 1/2" stile width requires what overlay dimension for double doors?
I need to replace two old euro style hinges for my existing cabinets but they have 1-1/2 inch overlays - which Blum Hinge Would you recommend?
Looking for a 1/2" overlay hinge like item Blum 55910 but only opens to a max of 95 degrees?
Reviews
4.5 / 5.0
110 Reviews
Well pleased with Hinges.
I am well pleased with the hinges. They are just what I was looking for.
I am pleased to know where I can find them when I need more.
Thank you.
I am pleased to know where I can find them when I need more.
Thank you.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Nice hinges.
These work very well for my needs.
Not the best picture, but I use these hinges almost exclusively on the buffets and islands I build.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Found 'em
Was not able to find these self closing hinges locally and guess I was blind, didn't see Blum on the existing hinges. Found these in a 2006 catalog I had kept, website still showed them as a current item! The are slightly different than the existing ones but was able to use the existing piece on the door frame with the part that fit in the door.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
NIce Hinges
3 way adjustment; if you're putting in a lot of hinges do yourself a favor and buy a jig. I used the Kreg jig and it worked wonderfully.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Great hinges for my Garage storage cabinets
Worked perfect for my shaker cabinet door project in my garage! The easy installation with the proper jig made them easy to install!
Added Sep 17, 2017
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Nickel Plated Blum Overlay Hinges
These hinges were replacements of the original cabinet makers hinges. Hinges fit perfectly. Look good and am satisfied.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
ease of installation,fluid hinge motion
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Blum overlay hinge
Looks professional and any cabinet door adjustments can be
made easily with this hinge
made easily with this hinge
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Hinges made easy
The hinges have three adjustments to them which makes it so convenient. If you are off a little bit the adjustments can make up the difference, so nice. Where two doors met I was able to adjust the hinges a little bit to make the doors match up perfectly. I would definitely recommend these to the first timer, as well as the seasoned pro.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
