Overview
Smooth, whisper-soft closing action paired with an equally graceful appearance make the new BLUMotion hinges a standout for visual and tactile aesthetics. BLUM's engineers have managed to integrate a virtually invisible damping mechanism into the much-loved Clip Top hinge design, preserving all of the 3-way adjustability and clip-on ease of the original. No more rattling glasses and banging cabinet doors and no bulky apparatus on the outside of the hinge. In addition, each hinge has a switch for turning the soft-close feature on or off: perfect for adjusting the speed of the close. Switching off one hinge on smaller, lighter doors allows the same soft-close speed throughout your kitchen. Self-lubricating with a full 110° opening angle. Compatible with doors up to 1" thick. This hinge is compatible with the JIG IT® Hinge Plate Template D #57345 (Sold Separately) for faster, more precise installation.
Note: Due to the new hinging action of the soft-close hinge, the original Clip Tops and Soft-Close Clip Tops may not be combined in the same door.
Frequently Bought Together
Questions and Answers
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 12 questions
Browse 12 questions
and 63 answers
Why did you choose this?
Rockler Store
I ordered a pair of hinges to see if they would work in my cabinets. They were just what I wanted and were delivered in a timely manner. I ordered more.
david l
on May 8, 2018
Found this hard to find item on the internet.
david l
on May 2, 2018
I ordered a pair of hinges to see if they would work in my cabinets. They were just what I wanted and were delivered in a timely manner. I ordered more.
david l
on May 8, 2018
Replacement for old broken Grass hinges
Alan D
on May 7, 2018
Are the referenced measurement ranges (3/8"-5/8" and 1/2"-3/4") for the door thickness or the amount of door overlay?
BEST ANSWER: The measurement ranges are for the overlay. These hinges were designed for a 3/4" thick door.
- Reply(1)
- Inaccurate
- Rick H Staff on May 19, 2015
Does this Blum make this hinge in bronze finish?
BEST ANSWER: I have absolutely no idea whatsoever.
- Reply
- Inaccurate
- Scott G on Jun 29, 2015
- Purchased on Mar 9, 2015
I am building a face frame cabinet with drawers (overlay drawer faces) on one side and an overlay door (3/4" thick) on the other side. I want the hinges for the door to be on the center of the cabinet (i.e., next to the drawers so that door opening is on the outside of the cabinet). The center post is 1-1/4" wide and the drawers have a 5/8" overlap so I have 5/8" of space for the door to overlap and open before it will hit the side of the drawer faces. So here is the question: how much clearance do the Blum 110 deg hinges need on the outside of the door face? It looks like most compact Euro hinges don't "swing in" so that with the 3/4" depth of the door I will smack into the drawers even if my overlap is only 3/8". But does the Blum "swing in" so that the door essentially shifts away from the hinges as it opens so that I won't hit the drawer faces? I realize this is a bit complicated story and question. Thanks in advance.
BEST ANSWER: These hinges swing the door in in an amount approximately equal to what overlay you've adjusted it to. With a 3/8" overlay and the door open at 90 degrees, the door should still overlay the face frame by about 3/8".
- Reply
- Inaccurate
- Steve W on Mar 29, 2016
- Purchased on Mar 3, 2015
what is included in a "pair" in the item description?
BEST ANSWER: A pair includes two hinges (1 cabinet member, 1 door member for each hinge), mounting screws (8 or 10 total), and 4 metal clips (2 per hinge) that cover the adjustment screws.
- Reply
- Inaccurate
- Dan & Angelina F on Apr 26, 2016
- Purchased on Mar 1, 2016
Are there tabs overlaying the backside of the face frame?
BEST ANSWER: There are tabs on the front of the hinge mounting plate to position the plate the correctly on the front of the face frame. There are no other tabs which allows installation on any thickness face frame.
- Reply
- Inaccurate
- Joe B on Jan 18, 2016
- Purchased on Apr 2, 2015
Do these hinges work for a 3/8 rabbeted face frame cabinet? Thanks
BEST ANSWER: This hinge is not designed to be used with 3/8" rabbeted doors. Rockler offers two suitable hinges, item52638 for face frame cabinets and 56534 for frameless cabinets.
- Reply
- Inaccurate
- David Staff on May 3, 2018
What is the tab for hinge 33600 and the depth?
BEST ANSWER: The tab is 5mm
http://go.rockler.com/tech/Blum-110-BLUMotion-3-8in-5-8in-Overlay-Face-Frame-Hinge-Instructions.pdf
http://go.rockler.com/tech/Blum-110-BLUMotion-3-8in-5-8in-Overlay-Face-Frame-Hinge-Instructions.pdf
- Reply
- Inaccurate
- Rick H Staff on Oct 27, 2017
can I use this hinge even if bore has only a 2.5mm dimenson set back?
BEST ANSWER: The tab for both of these hinges is 5mm. Please contact Rockler Product Information if you would like additional assistance selecting the appropriate hinge.
- Reply
- Inaccurate
- David Staff on Jul 19, 2017
Would this hinge work on 3/8" partial overlay door in a face frame cabinet? Door thickness is 3/4", but there's a 3/8" lip/overlay all the way around the door, then the inside part is another 3/8". Face frame is 5/8" thick. If it would work, can anyone recommend a tool for doing the boring that's bullet-proof? I have no experience doing boring and want to be sure that I don't mess up my doors. (My existing hinges are partially concealed, and they leave an inconsistent gap around the door which is quite visible and drives me nuts. Have tried & tried to adjust the hinges to fix that, but no joy.) Thank you for any information you can provide!!!!
BEST ANSWER: Hi CreaoleRose, These hinges have the adjustability to move the door 1/8 of an inch from center, Ideally your door would have 1/2 instead of 3/8 overlay. If properly installed these should work fine and the adjustment should allow the door to be placed where it completely covers the opening. If the adjustment is not quite enough, you can shim the hinge at the face frame. for installation of hinges Rockler has a drill bit and guide which reduces the chance for errors but nothing is as bulletproof as reading and following the detailed instructions included with the hinge and the tool. good luck, Joe ...
- Reply(1)
- Inaccurate
- Joe B on Aug 14, 2016
- Purchased on Apr 2, 2015
I need to know how far past the face frame the door edge will protrude when opened to 90 degrees. I'm building a cabinet in a bathroom with tight clearance, and the door might hit the toilet if the hinge allows it to protrude out into the room. My overlay will be 1/2". Another way to phrase the question is: If I have a door with 1/2" overlay, and the door is opened to 90 degrees, how large is the space between the door edge and the face frame?
BEST ANSWER: My overlay is 5/8" and at 90 degrees the space between the edge of the stile and the face frame is about 3/8". If that is too close, you might want to adjust the width of your door and corresponding section of the cabinet. Great hinges!!
- Reply
- Inaccurate
- John on Jan 8, 2016
- Purchased on Dec 9, 2015
Would this hinge work on a 5/8 lipped/partial inset door? If not does anyone have any suggestions on which type of concealed hinge and mount combo would work for my situation?
Reviews
4.8 / 5.0
49 Reviews
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Blum Hinges
This is an excellent quality product and has made my project a total success. The overlay works great for my application and the soft close works great. I would highly recommend this product.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Blum hinges
Refinished our 20 year old kitchen cabinets, as long as we had the 20 year old Blum hinges off, we replaced them with new, soft close Blum hinges. Beautiful performance.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Cooking oil storage
The hinges work as promised. Very easy to install and adjust.. I love these hinges.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Fantastic
Really high-quality product love the self-closing very quiet thinking of changing all the hinges in the kitchen
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Excellent results
I used these to replace old hinges for 18 kitchen cabinet doors. I had tried to use Blum Compact Soft-Close hinges but half inch cove cut into the outside edge of the doors made that impossible - too small a tab and cup hole cut through the cove. I tested the compact hinge on a piece of scrap pine in which I had routed a cove similar to the doors, therefore, no actual doors were damaged. The Blum 110 degree, Soft-Close overlay hinges with a 5mm tab worked perfectly. I and the customer are very pleased with the results.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
great hinges
well engineered, strong, easy to install , simple adjustments. one of the best decisions on my kitchen remodel. quality , quality, quality. worth the money
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Excellent, easy installation, exactly what I wanted works great, highly recommend....
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
was able to install these myself and they worked great. I just did not check the up and down setting of the door before installing hinges.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
More Suggestions
Regular Price:
Special Price
