Overview
Now you can have the smooth, soft-closing action of BLUMotion in a compact, space-saving hinge - ideal for face-frame cabinets or any cabinet where clearance is an issue. With Compact BLUMotion, the damping mechanism fits entirely within the hinge cup, allowing use of a smaller mounting plate. Each hinge has a switch for turning the soft-close feature off for use with small doors, and each retains the 3-way adjustability of other Blum hinges. Compact BLUmotion hinges are available in five different overlays, ranging from 3/8" to 1-3/8". Restrictor Clips (#47937) are also available below for restricting the opening angle to 86 degrees. This prevents the door from banging into adjacent cabinets or cabinet doors.
Note: #43870 is a Variable Overlay Hinge that mounts to the front of a face frame and only offers 2 way adjustment. All Non-Variable Overlay Face Frame Hinges have 3-way adjustability.
Note: #43870 is a Variable Overlay Hinge that mounts to the front of a face frame and only offers 2 way adjustment. All Non-Variable Overlay Face Frame Hinges have 3-way adjustability.
Related Products
We recommend using our JIG IT® Deluxe Concealed Hinge Drilling System with the JIG IT® Hinge Plate Template C to make installation of these hinges accurate and easy.
Frequently Bought Together
Questions and Answers
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 41 questions
Browse 41 questions
and 94 answers
This produce states that "hinges are available in five different overlays, ranging from 3/8" to 1-3/8"" What does the inches refer to? I am using 3/4" think boards
BEST ANSWER: Overlay is the amount the door covers or overlaps the front of the cabinet on the hinge side of the door when the door is closed.
- Reply(1)
- Inaccurate
- Steve Staff on Jun 17, 2015
What is diameter and depth of the hinge cup for a ¾ inch Blum soft close hinge?
BEST ANSWER: The cup hole size is 35mm and the depth of the hole is 11mm
- Reply
- Inaccurate
- Rick H Staff on Apr 20, 2015
do not know what overlay I need?
BEST ANSWER: For a Face Frame Cabinet, the overlay is the distance from the inside of the frame to the cabinet door edge. Just draw a line on the outside of the closed cabinet door, then measure the distance to the face frame edge; that's the overlay.
- Reply
- Inaccurate
- MARK B on Aug 5, 2015
- Purchased on Mar 10, 2015
are screws with each hinge?
BEST ANSWER: They were with the hinges I bought. The diameter of the screw heads and the finish are important.
- Reply
- Inaccurate
- Howard V on Dec 3, 2015
- Purchased on Mar 10, 2015
My face frame side is 7/8 inch thick,will these Blum hinges fit the frame or does it have to be 3/4 inch thick?
BEST ANSWER: I used them on 3/4 in thick frames. They worked beautifully. I did, however, notice that there appeared to be a bit of slop in the frame to hinge connection. I suggest getting one and trying it out.
- Reply
- Inaccurate
- Howard V on Apr 9, 2015
- Purchased on Mar 10, 2015
can this be used with 1inch thick face frame material?
BEST ANSWER: Yes I used 3/4 inch cherry for cabinet doors.
One hinge per door. Two come in a package. Use one soft close and one regular. It will take 5 minutes for door to shut if you use two soft close on one door, plus it saves money.
One hinge per door. Two come in a package. Use one soft close and one regular. It will take 5 minutes for door to shut if you use two soft close on one door, plus it saves money.
- Reply
- Inaccurate
- ray w on Aug 16, 2016
- Purchased on Mar 7, 2015
Is there a guideline for determining whether I need 2 or 3 hinges for any given door? Some of my doors, i.e. pantry, are rather large, while others are just tall, and I need to know if 2 hinges will be sufficient for those doors.
Thanks in advance!
MR
Thanks in advance!
MR
BEST ANSWER: The guideline I go by is on how much weight that the hinges can handle and how stable the wood is that the door is made of. If the door is tall but not heavy but the wood is not stable i use three or four on how big the door is to keep it from boeing. The blum soft-close can handle a heavy doors and shut softly compared to other brands that i used on lighter doors that there soft close can't handle and they just slam .
- Reply
- Inaccurate
- Ted D on Oct 3, 2015
- Purchased on Mar 7, 2015
How does the restrictive clips work and can it work with other brands of hinges?
BEST ANSWER: The clips work well with the Blum hinges. I don't know if they work with other brands. Make sure to install them before mounting the door to the cabinet. The clip must be installed while the hinge is in the closed position. The instructions weren't completely clear but the curved part of the clip lies on top of the hinge arm and the larger part of it is closest to the side of the cup next to the door edge. I found a pair of needle nose pliers worked well to seat both sides of the clip where the little tabs insert into the cup to hold it in place. The clip is a must have to prevent cabinet doors from banging into each other when doors open toward each other or the door is close to a wall and the knob or door will hit the wall possibly damaging the finish of the door or the wall.
- Reply
- Inaccurate
- VINTON I on Nov 6, 2015
- Purchased on Mar 3, 2015
I have 51" vertical door openings. How many hinges do I need per door?
Planning on using these 1-1/4" overlay hinges on a cabinet against a wall. The cabinet has a 1-1/2" face frame. Is 1/4" enough room for door to open completely without hitting wall?
BEST ANSWER: It should be no problem , but if you could just mock it up on a couple pieces of scrap to look like your cabinet side and that will tell you on ly take couple minutes and some scrap wood , and then you are sure they will work , hope that helps!
- Reply
- Inaccurate
- Hyatt B on Sep 21, 2016
- Purchased on Apr 2, 2015
MY CABINET BOTTOM HAS FULL PULL OUT DRAWS AND IM USING CENTERLINE DRAW SLIDES THAT NEED A 1/2 CLEARANCE ON EACH SIDE RFOM THE FACE FRAME WILL THIS HING OPEN ENOUGH SO I CAN PULL THE DRAES ALL THE WAY OUT ?
BEST ANSWER: Bill, I used the hinges that are surface mount (don't wrap around the face frame) because my doors were a little wider than for the standard design hinge. That being said, there would be plenty of room for your pull-out drawers.
- Reply
- Inaccurate
- George K on Jul 12, 2016
- Purchased on Apr 5, 2015
What is the minimum door style width that will work with theses hinges?
BEST ANSWER: If you are referring to the thickness of the door. I recommend at least 3/4 inch. The edge of the hinge is also within 1/2 inch of the edge of the door. Rocker has the door Jig Kits available.
- Reply(1)
- Inaccurate
- DANIEL T on Mar 21, 2016
- Purchased on Apr 3, 2015
can i use these hinges for inset cabinets? which would be zero or negative overlay?
BEST ANSWER: Nope, your asking this hinge to do something it was never intended to do. You won't be happy. Blum makes a great product. You just need to select the right hinge for your application.
- Reply
- Inaccurate
- Fred H on Oct 29, 2015
- Purchased on Mar 24, 2015
Will the Blum Restrictor Clip work with this hinge?
BEST ANSWER: Yes. I have used the blum restrictor clips on these blum overlay hinges. It took me a couple of tries to figure how they fit but once I figured that out they installed quickly and worked great. I used them on 7 cabinet doors and am very pleased with how they work.
- Reply
- Inaccurate
- Roger W on Sep 23, 2015
- Purchased on Mar 14, 2015
I have 3/4 face frame what hinges do I use so the doors open arou d cabinet?
BEST ANSWER: If you have a face frame on you cabinet then none of our hinges will wrap around the cabinet.
If you have frameless cabinet then the aximat hinges are my recommendation
If you have frameless cabinet then the aximat hinges are my recommendation
- Reply
- Inaccurate
- Rick H Staff on May 9, 2016
Can I use 7/8 inch door frames and 7/8 inch doors instead of 3/4 inch wood?
BEST ANSWER: No, you won't get a proper fit.
- Reply
- Inaccurate
- Fred H on Apr 4, 2016
- Purchased on Mar 24, 2015
My kitchen cabinet doors have a 3/8" overlay. However the front of the doors are a 1/2" wider than the back because these doors have a finger pull profile on their edges. Do I order the hinge for the 3/8" overlay or is it considered a 5/8" overlay?
BEST ANSWER: The Blum hinges I used would not work for your application. If installed as a 3/8" overlay, the door would open to only 75 degrees before the overlay would contact the face frame (and I'm sure you would need 90 degree minimum.) If installed as for a 5/8" overlay the hole to accept the door piece of the hinge would exceed the available space. I.E. it would show when viewed from the side. I hope I understand your question. George K.
- Reply(1)
- Inaccurate
- George K on Jan 7, 2016
- Purchased on Apr 5, 2015
are 1/2 inch overlay hinges zero protrusion?
BEST ANSWER: What you see in the diagram is about it. There's about an 1/8" "protusion" on the outside face of the stile but is hidden when the door ishut. The door insert is nearly the same. Properly installed you should have no problem.
- Reply
- Inaccurate
- HAROLD H on Nov 2, 2015
- Purchased on Mar 11, 2015
I want to replace my blum hiinges markeds 110 and 1 5/8 on bracket on door doors overlap 1 5/8 ?
BEST ANSWER: Rockler has two hinges that would work for your 1-5/8" overlay.
#90788 and #43870, both variable hinges and are mounted to the face frame face and not the end.
#90788 and #43870, both variable hinges and are mounted to the face frame face and not the end.
- Reply
- Inaccurate
- Rick H Staff on Oct 9, 2015
i have a cabinet opening of 14" and 13 1/2" , can i use the 3/8 in overlay. and does use the same jig in drilling pocket holes as any size hinge?
BEST ANSWER: I used a jig for a Hickory 35 mm hinge and it worked just fine.
- Reply
- Inaccurate
- Alan H on Jan 2, 2016
- Purchased on Oct 15, 2015
HI, I need a 0.875" overlay hing. Since the hinges are adjustable, will the 3/4" hinge adjust to 0.875" overlay?
BEST ANSWER: The hinge is adjustable to compensate for misalignment in mounting but not overlay which is fixed at .75 inch.
- Reply
- Inaccurate
- George P on Sep 22, 2015
- Purchased on Mar 27, 2015
I have a computer cabinet that the hinge broke, it currently has 6 European hinges and I want to know if this can work for a computer Hutch?
BEST ANSWER: I don't see why not. As long as you know what the overlay is and if you have two hinges on the door you might want to think about replacing both of them. Different hinges don't always play well with each other
- Reply
- Inaccurate
- Rick H Staff on Sep 17, 2015
does anyone know if these will replace a dtc hinge?
BEST ANSWER: It is quite possible that these can replace dtc hinges. You will need to know what the overlay is and you can check out the instructions of these under the Technical Downloads under the Blum Compact Soft-Close Blumotion overlay hinges for face frame
- Reply
- Inaccurate
- Rick H Staff on Aug 24, 2015
I'm using the Jig it I can't figure out what setting to use 3mm, 5mm, 4mm or 11mm. The hinges I'm using are 46762 1 1/4 overlay?
What is the right size if my face frame is conventional 1x2 material (3/4 x 1-3/4")?
BEST ANSWER: This will depend on how much of the face frame you wish to be covered by the door. Overlay is the amount the door covers or overlaps the face frame.
- Reply
- Inaccurate
- Steve Staff on Aug 6, 2015
what size bore diameter for 1inch 1/4 overlay door ?
BEST ANSWER: These hinges all use a 35mm diameter cup hole.
- Reply
- Inaccurate
- Steve Staff on Apr 27, 2015
If an adjustment screws are stripped can it be replaced?
The existing hinges are marked 5/8 so would I use 1/2 or 3/4 overlay hinges?
I have a 3/4" face-frame, and want a soft-close 3/8" overlay hinge, 2 hinges per door. If I use a Blum restrictor clip on only one hinge of each door, will that be sufficient to prevent collision with adjacent walls or doors?
Hindge broke on cabinet where would the part number be on the hinge?
Reviews
4.8 / 5.0
62 Reviews
I am a pro
Good quality. Customer was very pleased. Fit the orginal drilling for the original worn hinges. I was pleased with the product and the service.
- Was this review helpful? Yes (5) No (0)
- Flag as Inappropriate
September 18, 2014
- Was this review helpful? Yes (5) No (0)
- Flag as Inappropriate
Replace Grass 35mm 3-way European hinges
My kitchen cabinets were manufacturer built with Grass 35 mm 3-way European style hinges. Previously these were available at local home improvement stores, but have not been available since 2006. The Rockler #43870 BLUMotion hinges replace the Grass hinges perfectly and provide much better opening and closing functionality.
- Was this review helpful? Yes (4) No (0)
- Flag as Inappropriate
August 22, 2014
- Was this review helpful? Yes (4) No (0)
- Flag as Inappropriate
Blum hinges
These hinges are great. I used these 1/2" overlay hinges on my existing kitchen cabinets. I didn't need to buy a Fostner drill bit because I had one. I used my floor model drill press which makes it easier to drill the holes in the cabinet doors to except the new hinges. I wouldn't use any other hinge now that I used these Blum hinges.
- Was this review helpful? Yes (4) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (4) No (0)
- Flag as Inappropriate
Nice hinge
Easy to install and worked pefectly. Worth the extra bucks to stop the doors banging
- Was this review helpful? Yes (3) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (3) No (0)
- Flag as Inappropriate
I've used 'em before and . . .
I always go back to them.
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
Piece of cake
These hinges are a piece of cake to install with lots of possible ways to adjustment so that door spacing in rows of cabinets looks like it was done by a pro. Well, in this case it was but a moderately skilled woodworker can achieve professional results and the soft close feature is a bonus!
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
soft close hinges
These were easy to install and adjust . A very nice hidden hinge
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
Excellent hinge / easy install
Great hinges & easy to install. Soft close works perfect.
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
The Good Soft Close Hinge
The Blum® Compact Soft-Close BLUMotion Overlay Hinges for Face-Frame is an excellent hinge. Very easy to install. I plan on buy more in the future.
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
Installation ease and performance
A great product if you want an amazingly soft close with an ease of installation that will make you smile. I was replacing conventional hinges so did not have to deal with template issues.
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
