Buffer's Polish  Zoom

Buffer's Polish

Item #: 81150
$18.00
Pint In Stock
A silicone- and wax-free formula for removing minor imperfections in the finish and creating a professional, high-gloss look.

Overview

This is the ultimate formula for removing minor imperfections in the finish and creating a professional, high-gloss, "wet" polish. It can be used either by hand or with a mechanical buffer on almost any fully cured finish. Offered in the original (#5) grade for excellent gloss and quick results. Pint.

Note: This product is not available in the Pasadena, Torrance Orange and Ontario stores due to AQMD VOC requirements

  • Designed to replace the traditional "tripoli and oil" final rub on gloss finishes.
  • Contains no silicones or waxes that could interfere with additional finish coats, touch-up or refinishing.
  • May be applied with a soft cloth, felt rubbing block or a low-speed electric buffer.

Please note that this item can be shipped only by UPS Ground to addresses within the continental United States.

Tech Spec

Brand Behlen
Manufacturer Part Number B730-2005
Weight (lbs) 2.2100
Size Pint

Technical Downloads:

Reviews

Customer Reviews

2 Review(s)

View All

I was looking for a polishing...

Matthew W from Tracy, CA Posted January 5, 2013
I was looking for a polishing product that would go onto my foam buffing pad easily, and after reading the review and description on here, it sounded like it would give me what I wanted. After trying it out for the first time, I couldn't be much happier with the results. Something I found out, though, is that it's essential to have a nice evenly sanded finish before you polish. If one spot has not been sanded enough with the same grit as the rest of the piece, it will not be as glossy even with the polish. However, once I made sure to get the finish reasonably flat and evenly sanded to about 2000 grit, this stuff worked wonders. I used my Porter Cable polisher with a foam pad on a medium speed, and it only took two rounds of polishing the surface thoroughly to get a high gloss. The dried excess comes off fairly easily with a clean paper towel and doesn't leave any streaks or residue on the surface once it's all wiped off. Overall this stuff is outstanding and I can't wait to use it on future projects. Definitely recommended!

I purchased the buffer's polish after...

Jason P from Minot, ND Posted May 1, 2008
I purchased the buffer's polish after a reccomendation from my father who has done woodworking as a hobby for the last 10 years. I currently have been doing woodworking for the past two years, and was completing a very high end shadow box and was looking for a professional finish. Since then I have used it on several other projects. I have used it on shellac, polyurethane, and varnish and got the same results no matter what type of clear coat I used. Mirrored finish every time. Application and clean up are easy and not much polish or effort is required as long as you wet sand first to remove any runs, brush marks, or if spraying, orange peel. It will leave a mirrored finish that you can read the fine print on the lable in. Well worth the minimal cost.

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Videos

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012
Feedback X