Overview
Label holder features an integrated drawer pull - ideal for curio chests, file drawers, card catalogs, hardware and jewelry storage, mail sorting, or any small chest of drawers where organization is a priority. Available in a range of finishes.
What's included
(1) Card Holder with Pull
(1) Package of screws
(1) Package of screws
Technical Details
- Cardholder measures 2-7/16''W x 1-5/16''H overall
- Card Size: 1-3/4''W x 1-1/8''H
- Projection from surface: 11/16''
- Card slot window is 1-5/8'' wide
- Plated finish
- Made in USA
Product Warnings
WARNING This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product Frequently Bought Together
Questions and Answers
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 7 questions
Browse 7 questions
and 30 answers
Why did you choose this?
Rockler Store
you had them in stock
eric H
on May 1, 2017
Replacement Pulls for a customers cabinet that we are refinishing.
Tim D
on Mar 3, 2017
you had them in stock
eric H
on May 1, 2017
I made 12 magazine storage boxes and want to use these on the backs for easy retrieval from the shelf.
Byron V
on Mar 20, 2017
What is this product made of?
BEST ANSWER: I think it is made of good steel with a brass finish. The reason I say this is because I used them on large drawers that held rather heavy material and they work just fine, have not been pulled out of shape in any way. I am totally satisfied with them. Millard Jones
- Reply
- Inaccurate
- Millard J on Jul 8, 2015
- Purchased on Dec 10, 2014
how long are the screws?
BEST ANSWER: As I recall they are about 5/8 inch long. They go into a 3/4 board with out going through but long enough to hold forever. Millard
- Reply
- Inaccurate
- Millard J on Sep 21, 2015
- Purchased on Dec 10, 2014
Do you have to pre drill for the screws?
BEST ANSWER: I did not, but I was mounting mine on old barn wood - very soft. I would at least drive steel screws first, especially if you are mounting them on hardwood.
- Reply
- Inaccurate
- Dan T on Nov 2, 2016
- Purchased on Dec 6, 2014
do you carry just the pulls without the card holders?
BEST ANSWER: Yes, there are called finger pulls.
Hope you can find them.
Michele
Hope you can find them.
Michele
- Reply
- Inaccurate
- Michele B on Aug 17, 2017
- Purchased on Oct 1, 2015
How far apart are the screw holes? I am looking to replace on antique desk.
I am looking to replace card holding pulls on a metal parts storage cabinet, the old units have 5/16" dia. U shaped handle with 5/8" center to center mounting post?
Reviews
4.2 / 5.0
11 Reviews
Improved over prior version
Years ago I purchased some of these to put on the outside of wooden magazine holders. At that time they were held on by two small brads, one at each end. The current version has switched to small wood screws and added a third attachment point below the card as well as the holes on either the right or left side ot the card. Clearly a stronger arrangement.
It is nice when you find a product that you have used in the past that has been changed for the better!
It is nice when you find a product that you have used in the past that has been changed for the better!
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
good deal
They have the very look that I want ( old library card catalog).
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Fun and durable
I put these on a regular paper box that I covered with colorful paper and it looks just like a drawer on my bookshelf
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Card Holders with Pulls
These were just right for my project. Thanks!
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Card Holders with Pulls
I was a little shocked by how much smaller they were when I opened the package. I had thought they where going to be wider, from when I was a kid in school, then remembered that was a long time a go and I was a lot smaller than I am now. But for the project I am doing they are the right size and I have no complaining. I am so glad that I made this order.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
September 7, 2014
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
love the look
these worked great. they were easy to add to my CD cases. they look old fashion. that's what I was looking for
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Perfect for my project
These are great looking, easy to install and really practical. I will order them again!
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
strength
I liked this pull because of the extra screw right were the pull is. This will give it extra strength when pulling the magazine box off the shelf. This was the best I found for the price.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Disappointed
Frankly I was disappointed with the product as in the magazine they looked large enough to put on a filing cabinet to dress it up. In reality they are the size of a "doll house" i will keep them and someday find a use for them but it was not as expected. Sorry
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Card Holders
These card holders I used on a set of 12 magazine boxes I made for all my woodworking magazines and books. They are much smaller than I had expected but good quality.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
