Turn ordinary logs in to beautiful pieces of read-to-use lumber of any thickness  Zoom

New

Carter Accuright® Log Mill™

Item #: 42114
$139.95
Each In Stock

Overview

Turn your bandsaw into a sawmill and save money by cutting your own lumber!
  • Easy to use and quick to set up
  • Uses the miter slot on your bandsaw for accurate cuts
  • Resaws ordinary logs into any desired thickness


  • Sled system that uses the miter slot in your bandsaw to cut and square raw wood logs
  • Heavy-duty steel right angle fence prevents logs from rolling during the cut
  • Uses a locking jaw on the back and a clamp on the front to secure logs to the mill
  • Adjustable fence lets you make repetitive cuts or use with a stationary fence on your saw as a jig for same-thickness cuts
  • Turns raw logs into beautiful, ready-to-use lumber
  • Requires a standard  3/4'' W x 3/8'' D miter slot.
Includes:
  • Heavy-duty steel frame
  • MDF log mill platform
  • Steel miter bar
  • Front clamping assembly
  • Back locking jaw
  • Self-adhesive Mylar slide strips
  • Required hardware

Tech Spec

Brand Carter
Manufacturer Part Number AC-LOGMILL1000
Weight (lbs) 16.7600
Type Log Mill

Reviews

Customer Reviews

3 Review(s)

View All

Great product though I wish the...

Marc B from Bondsville, MA Posted July 18, 2011
Great product though I wish the sled came as a little longer for cutting larger logs. Assembly was very quick, it would have been quicker if I had not put the part with the press handle on it backwards. I've had some issues where it will not hold a couple of pieces of oak that had been split for firewood because of twisting in the wood caused the piece to pop out of the clamping when tightening the press. Otherwise, it works great, especially for very odd logs that have bends or crotches in them.

Product does an excellent job of...

Carl P from Slidell, LA Posted July 8, 2011
Product does an excellent job of providing 2 sides on a rough, round log section on the bandsaw that are both flat and are perpendicular to each other. It is easy to use, to adjust and gives excellsent results for moving then to the bandsaw fence to saw lumber slabs off at whatever thickness you wish. I only wish that it could give longer lengths like say 26" rather than the 21". I definitely would recommend it as a buy for making short lengths of lumber from "found" wood.

The mill is designed to cut...

Edward A Posted October 17, 2012
The mill is designed to cut boards from a short log! that is cut one side flat then place that flat side on the platform and proceed to cut boards from the log. It is not intended to cut 2 sides parallel on a log as the fence is not necessarly square to the platform.

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Videos

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012
Feedback X