Coffee and Cream Inlace Acrylester Pen Blank  Zoom

Coffee and Cream Inlace Acrylester Pen Blank

Item #: 39733
$9.99
Each In Stock

Overview

"Coffee and Cream" blanks are made with real roasted coffee beans! Turning these blanks (carefully-the beans are brittle!) will fill your shop with the aroma of freshly ground coffee. Inlace Acrylester semi-translucent pen blanks have a pearlescent quality that will give your finished pens great depth when viewed in the light. Acrylester turns much like acrylic.

  • Blanks are 3/4" square x 5" long.
  • For experienced turners using sharp tools.
  • Also available from Rockler, the Cappuccino turning blank.

Tech Spec

Manufacturer Part Number PBIA90
Weight (lbs) 0.1200
Length 5"
Width 3/4"

Reviews

Customer Reviews

4 Review(s)

View All

Some tips

Jason Posted December 19, 2013
I used the "Inferno" blank, but thought that this may be helpful:
I found that the 2 main keys to successful turning of these blanks are 1) after rounding, increase speed (I used 2430 RPM) and 2) use sharp tools. Slower speeds and dull tools produce chips. Other tips: use a live center (like Rockler's 43472). My lathe had a "dead" center, which I started to use, then quickly realized that it was melting the acrylester...duh. I switched to a live center which worked great. Don't be aggressive. Be gentle. Trying to cut too fast will result in chipping. When sanding, try not to create too much heat. I found that if I wasn't constantly moving the sandpaper around, it created too much heat and caused tiny cracks in the surface of the acrylester. I used a DAMP Scotchbrite-type abrasive pad (equivalent to #00 steel wool) for the last step before polishing, which worked really well. I made a pizza cutter handle (for Rockler's 34913) and thanks to a tip I found somewhere, I placed the insert on the allen wrench and heated it up with a propane torch. Not SUPER hot, but hot, then quickly screwed it in (I drilled a 1/2" hole). This worked beautifully. Otherwise, I fear that it would have cracked the handle. The end result was a beautiful, smooth, shiny handle. I didn't have to fill anything with CA glue like some of the other reviews I've read about acrylester. Good luck!

I thought this would be a...

Guest from Rolling Meadows, IL Posted July 18, 2010
I thought this would be a waste of money but it came out great and I made a profit.

Soft beans and hard acrylic makes...

Jerry P from Corpus Christi, TX Posted August 17, 2011
Soft beans and hard acrylic makes for challenging turning. The key is to use very sharp tools and light cuts. Finished with Medium CA and wet sanding with Micro Mesh pads 30710.

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Videos

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012
Feedback X