Combination Waterstones  Zoom

Combination Waterstones

product name price quantity total
250/1000 Combination Grit Waterstone Item #: 20549
In Stock
 
$26.79

Each
$26.79
800/4000 Combination Grit Waterstone Item #: 20542
In Stock
 
$32.59

Each
$32.59
1000/6000 Combination Grit Waterstone Item #: 47506
In Stock
 
$40.99

Each
$40.99
250/1000 Combination Grit Waterstone Item #: 20549
In Stock
 
Price:
$26.79
Each
Quantity:
Total: $26.79
800/4000 Combination Grit Waterstone Item #: 20542
In Stock
 
Price:
$32.59
Each
Quantity:
Total: $32.59
1000/6000 Combination Grit Waterstone Item #: 47506
In Stock
 
Price:
$40.99
Each
Quantity:
Total: $40.99

Overview

Keep your valuable tools in peak condition!

  • Combination Waterstones: For preliminary sharpening where chips exist or bevel angle need to be changed, use the 250/100 waterstone. To remove smaller nicks and do a finish sharpening of woodworking chisels and other tools, the 800/4000 combination is the best choice. Finally, use the 1000/6000 waterstone for creating a polished edge. As shown in the photo on the left.
  • Extremely tough man made abrasive material. These stones cut faster than oilstones. Stones must be soaked in water prior to use and kept wet with water during use. Waterstones develop a slurry to speed the honing process.
  • 20549 - 250/1000 Combination Grit Waterstone: 7-1/4" (L) x 1" (thick) x 2-1/4" (W)
  • 20542 - 800/4000 Combination Grit Waterstone: 7-1/4" (L) x 1" (thick) x 2-1/4" (W)
  • 47506 - 1000/6000 Combination Grit Waterstone: 8-1/8" (L) x 1" (thick) x 2-1/16" (W)
  • 47522 - Nagura Stone: 3" (L) x 1" (thick) x 7/8" (W)
  • Nagura Stone: Forms a paste on finer grit Waterstones to speed and enhance polishing. Use with the 6000 grit stone.
  • These stones can be reflattened after sharpening wears the surface by wet sanding the stone on a flat surface with silicone carbide wet - dry abrasive sheet.
  • Waterstone Holder: For non-slip sharpening. The arms are made from chrome plated steel that resists rusting. Holder handles stones 7 to 9" long.

Tech Spec

Reviews

Customer Reviews

4 Review(s)

View All

I have an 800/4000 that I...

Isaiah L from Bristol, RI Posted March 25, 2009
I have an 800/4000 that I got in a Rockler starter kit with a 6000 that works wonderfully. I got the 250/1000 for taking out nicks, the stone works really well but is only 2" wide(unlike the kit 2 1/2") making it hard to hone plane blades easily.

The 800/4000 combo is too soft....

Guest from North Bergen, NJ Posted May 6, 2011
The 800/4000 combo is too soft. You have to be very careful when moving the knife in the upward motion as it can dig into the stone very easily.

I received my 250/1000 combination wet...

Kenneth R from Idaho Falls, ID Posted March 10, 2011
I received my 250/1000 combination wet stone last week. Right away I set out sharpening 3 hand planes and four chisels that were in bad need of sharpening. I was able to get out all of the nicks and put a decent edge on them. Now I just need to get a harder stone to hone them. The 1000 side did seem a little soft. Tools wanted to gouge or dig in when being sharpened. I had to be real careful while sharpening to avoid that. I wonder how long that side will remain flat. All in all, it worked real fine. I am happy, it did what I wanted.

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Videos

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012
Feedback X