Customer Project Gallery |
Category: Furniture |
Lingerie Chest |
|
Project Description: I created this piece using Google Sketch which is based off of a piece that I found online. It was made using solid Red Oak. I made dust panels for each drawer and flush front dovetailed drawers, which are always a challenge. I used the Kreg pocket screw jig to attached the panel dividers on the sides. To accomplish the sides I did a dry fit without the 1/4" ply panel. Then using a 1/4" x 3/8" slot cutter on a router I cut the slots to accept the plywood. After chiseling out the corners I was able to fit back together and create the sides. This was a great project, but a little more difficult and time consuming than I was antcipating. Time to Build: 21-50 Hours Difficulty: Difficult Rockler Parts Used for This Project: 22708 - Kreg R3 Pocket Hole System 26613 - Kreg Premium Face Clamp, 3-1/4'' Reach |