Overview
Separate large wood chips out of your system before they reach your dust collector. Two pairs of plastic elbow and coupler components serve as infeed and outfeed points when you install them on either end of a box, bin or other fixture you wish to use to catch large wood chips. This system will save wear and tear on your dust collector, and you won't have to empty it as often. The two coupler components fit standard 4" dust hose as well as the Dust Right® Handle system (22643, sold separately).
Go to the "Tech Spec" tab for a FREE downloadable plan for a Dust Separator Cabinet, plus instructions to build the Barrel Dust Separator shown above!
Tech Spec
| Brand | Dust Right |
|---|---|
| Weight (lbs) | 1.9700 |
What's included:
(2) Plastic Elbows
(2) Straight Couplers
(2) Circle Templates (for cutting holes)
Technical Downloads:
Reviews
Customer Reviews
25 Review(s)
View AllWorks Great
Posted December 29, 2014
Some of the reviews get into the details of containers and design. I built a 26" cube out of 1/2" plywood (made sure there are no gaps in the seams), hinged the top and trimmed the underside of the top with weather stripping to make a seal. Works great - I don't know if I've lost suction ( I guess I must have given the physics of extra hoses and the 26x26 box that the air passes through), but I find the floor sweep is working PERFECTLY. Anything made of wood gets sucked up, nails stay behind. This may change when I seal the floor sweep to the floor - right now it's just sitting. My dust collector is Harbor Freight "70 gal. Industrial 5 Micron Dust Collector" and works fine with the Rockler accessories.
Works great and solved the problem.
Posted December 26, 2014
Purchased this kit to make my own chip separator because the grates on my dust collector would stop the chips from my planer and plug up my collection hoses. This along with the 10', clear 4" hose did the trick. With included plans it was an easy and affordable solution.
Works better than expected
Posted December 17, 2014
I "tried" these in an effort to spare the impeller on my dust collector. I didn't have a spare garbage can so I built a box (24" square) out of 1/2" plywood I had laying around. I expected to lose airflow, but was pleasantly surprised at how well this setup works - great airflow, big stuff stays in the box, very fine dust makes it to the collector - exactly as it should be.
Videos
Related Products
Swipe to see more
You may also like
Swipe to see more
