Overview
Get dust around corners without compromising power or efficiency. The rubber boot provides a tight seal around your dust collection system input, giving you a leak-free portal toward a cleaner shop.
Features:
- Gets dust around corners without compromising power or suction
- Provides a tight seal on each end for leak-free suction
- Rubber boot is flexible to handle tugging when used with a hand-held suction hose
- Designed to work with the Dust Right® Handle (sold separately) or our 4'' hose (sold separately)
Questions and Answers
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 12 questions
Browse 12 questions
and 75 answers
Why did you choose this?
Rockler Store
What is the outside dimension of the male end and the inside of the female end?
BEST ANSWER: Male end 3.9295 at it's widest point. Female end 4.060 to 3.9200 since it is rubber it isn't round.
- Reply
- Inaccurate
- oz on Dec 13, 2016
- Purchased on Mar 3, 2015
How many inches des this stick out from the table saw port? I am building an outfeed table and need to know how much space it needs between the table saw and the side of the cabinet. Thanks
do these swivel or are they fixed?
BEST ANSWER: They do not swivel. They will rotate if you do it gently. I like them, because it makes moving the hose so easy. I have a fitting on everything with the hand connector on the dust collector hose. It make life a lot easier to move things around.
- Reply
- Inaccurate
- Dave B on Jun 27, 2015
- Purchased on Apr 1, 2015
Will this connect directly to the dust right router table dual port fitting (#20225)?
BEST ANSWER: Yes, it will connect. I have this set-up on my router/table saw combo.
- Reply
- Inaccurate
- woodenbear on Dec 28, 2016
- Purchased on Feb 2, 2015
Will this attach to a Powermatic 66 dust port?
BEST ANSWER: It fits a standard 4' port, so if the Powermactic port is 4" you should be good to go. The band where the two clams are is flexible to compress around the port. As long as the port sticks out 2-3 inches, it should work.
- Reply
- Inaccurate
- Damon H on Jan 10, 2016
- Purchased on Apr 2, 2015
Does the 4" Dust Right handle fit over the male end of the elbow snugly ?
BEST ANSWER: Yes, it fits the same as other dust right fittings, as snugly as you would want and still be able to pull the handle off and move it to another machine. I have this four inch elbow on the back of my spindle sander which is up against the wall so the elbow was necessary to attach the handle.
- Reply(1)
- Inaccurate
- Terry Q on May 31, 2017
- Purchased on Jun 8, 2015
I have a dewalt thickness planer, I need a 45 or 90 degree elbow, the port coming out of the planer is 4 inch outside, what do you have? ray
BEST ANSWER: I have this elbow but the swivel one and the dust tight handle. Works like a charm but had to build a small support because the elbow and the handle plus the hose weight is pretty heavy and I was afraid it would break off the outlet fitting of the Dewalt.
- Reply
- Inaccurate
- Michel P on Mar 12, 2017
I have built a dust collector with a 35 gal plastic drum that I got from the local car wash. I use part 34367 for the connectors, I would like to know if this 4" quick connect elbow port will connect and keep the hoses from kinking?
BEST ANSWER: It will direct the hose in the direction it's aimed. Rockler does have another fitting that will rotate to keep the hose from twisting
- Reply
- Inaccurate
- Dennis W on Feb 2, 2016
- Purchased on Mar 11, 2015
will this elbow connect to the wall mounted main unit?
Rockler Dust Right® Quick Connect 4'' Elbow
BEST ANSWER: The end of the elbow with the two clamps fits a 4" exterior diameter pipe/hose. Since the specs on the wall unit say it has a 4" intake, it should fit just fine. The clamped end is made of flexible rubber and seals to the pipe/hose/intake as you tighten the clamps. That said, the other end is made to fit the Dust Right handle.
- Reply
- Inaccurate
- Damon H on Aug 26, 2015
- Purchased on Apr 2, 2015
what is the i.d. of this adapter/elbow ?
Will the Rockler Dust Right® Quick Connect 4'' Elbow fit a 4-7/8" fan inlet?
Reviews
4.6 / 5.0
50 Reviews
Great product
Perfect for a new Ridgid 4512 table saw as the right angle allows connection to a shop vac; the lift mechanism on the saws directly below the dust port and this avoids it.
- Was this review helpful? Yes (5) No (1)
- Flag as Inappropriate
- Was this review helpful? Yes (5) No (1)
- Flag as Inappropriate
Secure attachment
Finally, a fitting that attaches securely to dust ports. The rubber slip coupling with hose clamps holds the elbow firmly in place.
It will not fall off while the machine is operating, not even
if you accidentally kick the hose.
It will not fall off while the machine is operating, not even
if you accidentally kick the hose.
- Was this review helpful? Yes (3) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (3) No (0)
- Flag as Inappropriate
Excellent product; works as advertised.
I spent a lot of money on 4" dust collection hoses of different types as well as quick disconnects before I discovered Rockler's Dust Right system. I have a small shop and keep my power tools long the perimeter, pulling my table saw, jointer, planer and router table to the center when needed. My dust collection system is against one wall in the middle of the shop. By keeping a clear path to the center of the room (meaning the center 6' X 25' long section of a 15' X 25' shop), I simply remove the hose handle from it's keeper (also Rockler), attach it to the tool, hit my remote control for the collector, and turn on the tool.
I used this elbow on my Dewalt planer and my Ridgid R4512 Hybrid table saw and it works like a charm. The application for the planer is just as you see pictured in the sales ad. For the table saw, I connected a short piece of 4"hose to the dust collection pan under the saw, ran it about 30" and connected it to this elbow. I then cut a hole in a 3/4" piece of plywood, bolted it to the saw stand, and stuck the other end of the elbow through the hole with a very tight fit.
The seal on the Dust Right connections that go with this handle maintain an excellent seal with no leakage. (I have several connectors including straight 4" and right angle elbow types.
Add this to the Dust Right hoses that collapse to 1/7' of their length and it's a great space saver combination.
I used this elbow on my Dewalt planer and my Ridgid R4512 Hybrid table saw and it works like a charm. The application for the planer is just as you see pictured in the sales ad. For the table saw, I connected a short piece of 4"hose to the dust collection pan under the saw, ran it about 30" and connected it to this elbow. I then cut a hole in a 3/4" piece of plywood, bolted it to the saw stand, and stuck the other end of the elbow through the hole with a very tight fit.
The seal on the Dust Right connections that go with this handle maintain an excellent seal with no leakage. (I have several connectors including straight 4" and right angle elbow types.
Add this to the Dust Right hoses that collapse to 1/7' of their length and it's a great space saver combination.
- Was this review helpful? Yes (3) No (1)
- Flag as Inappropriate
- Was this review helpful? Yes (3) No (1)
- Flag as Inappropriate
QUICK CONNECT
THE ROCKLER DUST RIGHT QUICK CONNECT WAS A GREAT BUY. FIT LIKE IT SHOULD. I USED IT FOR MY DeWALT PLANNER THAT I ALSO GOT FROM ROCKLER. REALLY HAPPY WITH THIS PRODUCT
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (2) No (0)
- Flag as Inappropriate
Perfect addition to my Dewalt 735 planer. Love how it keeps the dust hose away from the out feed table
Added Jul 22, 2016
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
I didn't want to love it. But you won me over.
Initially I thought this was overpriced. I was going to hobble something cheaper together with PVC fittings of duct work. but this product made everything just so simpler! The rubber side just slipped over my Craftsman port. I only needed to use one of the clamps to hold it securely to the base. The other side surprisingly allowed the flexible hose to slide on with no headaches. I recommend a good clamp for the hose side, consider one of the bridge style or a double wire spring style. This worked well and turns the port right where I needed it with no hassle. Thank you Rockler for another great innovation.
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
December 19, 2014
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
A needed item for my system
I have several of these and use them to make right angle bends in my 4 inch hose connections for my band saw, table saw and planer instead of trying to bend the hose which restricts air flow to the main dust collector line..
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Very versatile; using 3 now and will order more
I ordered several to have as spares and have used them all on various setups. The dust right handle fits perfectly over the large end and the neoprene coupling fits tool ports and other adapters I have. Not sure if they have a straight version in catalog, and would also be nice to have a 45 degree version of this coupling
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
4" Elbow
Works great with my dust cyclone and carving machine
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Connect dust collector to Dewalt Planer
I needed this adapter to connect my new Dewalt DW734 palner to my dust collection system. It fit great and worked as I hoped it would.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
