Fasteners apply controlled pressure between joint members.
These fasteners prevent joint members from twisting and buckling. Great for joining countertops. 4-1/16'' long bolt allows a center to center range of 2'' to 3-1/2''.
Requires 7/8'' diameter holes 5/8'' deep.
Customer Reviews and Photos for: Tite Joint Fasteners
1) Submitted by
John Turner, from Lakewood, OH
on 12/20/2008
Customer Rating:
You do NOT want to use a forstner WITH a guide point if you are installing these on 23/32 sheet goods! But they are excellent connectors that allow you to make the joint virtually invisible.
2) Submitted by
Mike, from Peru, IN
on 12/6/2008
Customer Rating:
Works great. I had to add a three foot section to finish the L shape of my countertops. Never used these before but I am very happy with the way everything turned out. I'd sure use them again.
3) Submitted by
M.Dreas, from Emmaus, PA
on 7/10/2008
Customer Rating:
Great product for joining countertops or bartops. I used it for both and was very pleased.
4) Submitted by
Dan Askey, from Weatherford, TX
on 12/5/2007
Customer Rating:
I've used Lock-Tite fasteners on previous projects, but was disappointed when unable to find them at some of the largest woodworking supply outlets in the Dallas area. But Rockler came through, and I had the hardware I needed in just a few days. Nothing beats Lock-Tite fasteners for a zero-gap joint for countertop assembly. Thanks, Rockler!
5) Submitted by
Chris Wilson, from Chiefland, FL
on 7/3/2009
Customer Rating:
Connectors are very good...the drill bit was almost useless.
6) Submitted by
Carl Scholz, from Jersey City, NJ
on 4/26/2009
Customer Rating:
Tite joint fasteners and drill guide work great. Skip the tite joint drill dit - is a piece made from sheet metal.
7) Submitted by
Brenden, from Eureka Springs, AR
on 10/16/2007
I used the Tite Joint fasteners to join the 45 deg.corners of my bar top. They worked great and were easy to install with the guide and bit. The bar top was made from an old maple tree that blew over on my property. I milled it and air dried the lumber for a year.
"I recently stumbled into woodworking and have since then taken a liking to Rockler because of their outstanding product selection and customer service." -
Jason B
- 03/25/2009 See more...
CART
