Hanger bolts for your difficult woodworking jobs. Can be used with Teenuts and Threaded inserts. Also use with steel corner braces or clinch nut plates for the table and rail construction.
1) Submitted by
John, from Kenton, OH
on 3/26/2009
Customer Rating:
This was the first time I used these bolts, I used the 1/4" ones. The pedestal for my table was solid oak, and very heavy. I used 2 per leg, ran them down. The legs were nice and tight. I also used them to fasten the table top to the base. Nice strong fastener!Easy to use!
table
2) Submitted by
Michael J Evanich, from Springfield, IL
on 11/28/2008
Customer Rating:
Used the three inch hanger bolts to enclose my deck for the winter they work great as sill anchors, and the tee-nuts makes it possible for easy assy of the walls for take down in the summer.
3) Submitted by
Stuart Hamblin, from Gulf Breeze , FL
on 9/23/2008
Customer Rating:
Product worked with little effort or brain power. I followed the Rockler website provided data sheet and produced extremly tight studs with no split legs.
4) Submitted by
Warren Searls, from Hot Springs Village, AR
on 3/18/2008
Customer Rating:
Threads clean, easy start. Good price. I have now used over 400 of these hanger bolts for a Arkansas Children's Hospital project without any problem. Always used the insert tool when screwing bolt into wood.
5) Submitted by
Tom Flaherty, from Issue, MD
on 2/10/2008
Customer Rating:
Product page doesn't make it clear these come in packs of 8. Didn't know whether I would need 1/4" or 5/16" so ordered 4 of each. Now I have 64 hanger bolts to install 4 muffin feet with.
Editor's note: We note the package quantity on the "more info" page of this offer Tom. Return can be made on the extras you ordered.
6) Submitted by
Donald Rolfe, from Rising Sun, MD
on 12/1/2007
Customer Rating:
Bolts worked great. But I didn't know what size hole I needed to drill in the wood before I installed the bolt but I figured it out. Great hardware.
"I just do not know what to say about ROCKLERs above and far beyond customer service except for a simple thank you which doesnt begin to even start but thank you (everyone at ROCKLER) so much for all that you do. To potential customers, if you do not go to ROCKLER, you should have because you will not be getting the best in the business. Thanks again ROCKLER. Harry & Harry SLC, UT" -
Harry & Harry SLC, UT
- 08/14/2009 See more...
CART
