Related Products
|
- Overview
- More Info
- Reviews
Solidly built to eliminate sagging.
Sturdy, rugged and precision crafted for years of trouble-free service. To determine
correct support for your table: measure distance "A" (apron to hinge
pin center), then determine "B" on the graph by matching "A" with the
drop leaf support length. Brass finish. Screws included.
Price per pair.
| Distance A |
|
|
|
| Size inches |
1 1/2" |
2" |
2 1/2" |
| |
|
|
|
| Distance B |
|
|
|
| 6 |
2 13/16 " |
2 1/2" |
2 1/8" |
| 8 |
2 7/8" |
2 1/2" |
2 1/8" |
| 12 |
4 1/2" |
4" |
3 7/16" |
|
| |
Customer Reviews and Photos for:
Drop Leaf Support
|
Average Rating:
(4.6)
(25 customer reviews)
Add your review...
|
|
|
1) Submitted by
Dan, from Exton, PA
on 9/28/2009
Customer Rating: 
Used the measuring guide (in the "more info" part) to determine which set to order. I was replacing an original support that had broken. The fit was perfect, I ended up using the old screws in the exact same mounting location. Table leaf is level and sturdy. No more stacking books ontop of a snack table to support it! A great product, easy to install. A+
|
|
2) Submitted by
Marty, from Windsor Heights, IA
on 9/2/2009
Customer Rating:
I bought these supports to repair an old dining table that had one broken support. I'm good with fixing things, but terrible at measuring accurately. This was so easy to install that I was not aware that there were installation instructions available. It installed easily, and using a level, it is also very accurate in spite of my personal deficiency.
|
|
3) Submitted by
Sharon, from Bloomfield, CT
on 8/12/2009
Customer Rating:
We have a 20+ year old drop leaf kitchen table that is the perfect size and shape for our needs that needed one new support. The original manufacturer no longer exists. Yours worked beautifully and I am sure we will have many more years of using this table. Ordering was easy and shipping was prompt. Thank you!
|
|
4) Submitted by
jeppetto, from anacortes, WA
on 7/19/2009
Customer Rating: 
The brackets work excellent. The adjustment feature and the finger pulls are something that sets these apart from others I have installed.
It would be nice to have a better way of gauging the distance's to place the ends when the table top does not extend the predetermined distance in the data sheet.
After trial and error they installed perfectly with a 1 1/8" overhang, which, by the data sheet (definitely download it)should have been 2 1/2" (distance A).
I would buy this product again if the need arises.
|
|
5) Submitted by
Richard, from Huntersville, PA
on 3/6/2009
Customer Rating:
I am an Audio Visual technician/designer so my woodworking skills are no where to be found. I wanted to make a shelf in our craft room that would drop down and be out of the way when not in use. So I did some web searching and found this product. It turns out there is a Rockler store near me so I went there and purchased these supports. I down loaded the instructions and proceeded to make a drop down shelf from an old sewing machine cabinet. I found the instructions very easy to follow and my finished product is just what I wanted. The level adjustment is the greatest. I was able to level it perfectly with the turn of the adjuster. Right now there is a Singer Surger on the shelf with no sag what so ever. A very impressive inexpensive product that I will recommend to anyone
|
|
6) Submitted by
T Bader, from Green Bay, WI
on 1/10/2009
Customer Rating:
I used this product on a drop leaf dining table I built with a 1 1/8" top. Two supports for an 8" by 48" leaf created a surface on which I tested approximately 40 lbs of pressure without deflection. More than sufficient for my purpose. The simple but effective micro-adjust feature makes it easy to get the top of the drop leaf perfectly level. The no-pinch pulls are an excellent idea, and when the leaf is dropped, they can be pushed back and out of sight. Although not a complicated product, better instructions would have been useful. The PDF file on the website contains detailed instructions. I would buy this product again.
|
|
7) Submitted by
Betty Williams, from Bixby, OK
on 2/22/2009
Customer Rating:
The product does work great, however instructions would have aided me in getting it level. Now one side is livable but the other side of the apron sags. I have almost run out of drill places. Please send instructions to my email on how to level it up.
Editor's note: please see link under 'tech documents' in left hand side bar for instructions.
|
See all
25 reviews...
|
Home  Hardware Table Hardware Table Leaf and Locks Drop Leaf Support
|
|
CART
