1) Submitted by
Marvin Fly, from Stillwater, OK
on 5/6/2009
Customer Rating:
I have used these several times to make strong square connection of apron to legs. They allow quick disassembly of legs from table and make a solid table. Also critically they allow table top to be free to expand and contract with moisture content when it is attached with table top fastners. This is needed to prevent splitting the top.
2) Submitted by
Ryan, from Des Moines , IA
on 4/7/2009
Customer Rating:
This product was exactly what I needed and very easy to use. These brackets can be difficult to find. Moreover, they produce a very solid and versitle table.
3) Submitted by
John, from Oxford, MS
on 3/23/2009
Customer Rating:
I used this to make a homework desk for the kids. Setup is easy, and the resulting table stability is rock steady. I will make another desk shortly, and will use these brackets again. For both desks, the ability to remove the legs was crucial. If this is not a feature you desire, a traditional joint may be more desirable. (Go ahead and get a driver for the hanging anchor bolts when you order the bolts.)
4) Submitted by
Stuart Hamblin, from Gulf Breeze, FL
on 9/23/2008
Customer Rating:
Corner Brackets filled the bill. Customer requested removable legs. This product produced strong right angled corners with little effort. Much quicker than the sliding dove tail or mortise/tendon I normally use.
5) Submitted by
Steven Andersen, from Stockton, CA
on 12/3/2007
Customer Rating:
I have used this piece of hardware on a line of coffee/end tables with great success. The dimensions of the hardware remain consistant from order to order.
6) Submitted by
Donald Rolfe, from Rising Sun, MD
on 12/1/2007
Customer Rating:
Corner braces worked great. I did have to go get the screws I needed to attach them. I was working with white oak lumber. I suggest using a very high grade screw for this because the wood is so hard.
7) Submitted by
Richard Mandel, from Boulder, CO
on 10/9/2008
Customer Rating:
I used the 3" brackets for a large table with 3.5" rails and they worked just fine. The quality and strength of the brackets is quite good, and the price was very good. I compared to my local supplier who charged twice the price for the same size, quality and strength.
CART
