This folding bracket is ideal for laundry room shelves.
This folding bracket is ideal for laundry room shelves.
Enjoy the convenience of shelves that fold down when you no longer need them. Perfect for light duty shelving applications. Fits into a low profile space.
1) Submitted by
Charlene , from Waco, TX
on 8/23/2009
Customer Rating:
It was just what I was looking for it fit the boxes outside perfect. Now I don't have to stand on the boxes to unlatch the lids from the fence.
2) Submitted by
Rod MacDonald, from Portland, OR
on 4/9/2009
Customer Rating:
The bracket's hinges are not as tightly made as I assumed they were, hence each bracket has lateral wiggle. This causes work surface to be somewhat unstable.
3) Submitted by
Peter, from Saluda, NC
on 3/31/2009
Customer Rating:
I needed a folding shelf in my garage for staging tools, containers, hardware for projects. The 8" brackets filled the bill. The specification sheet, downloaded from the web was accurate enough to have the shelf material prepped and ready when the brackets arrived. If I have other needs for folding shelves, I'll use the same product, or one of the "bigger brothers".
4) Submitted by
Peter, from Ruskin, FL
on 1/15/2009
Customer Rating:
Brackets needed reworking before use. The locking mechanism would not unlock.
5) Submitted by
Arthur Finn, from Chapel Hill, NC
on 7/3/2008
Customer Rating:
The brackets were perfect for what I wanted. I simply needed to put a shelf onto a door that was to be closed with very little clearance (from the washer-dryer in a small laundry room off our kitchen). They are strong enough for this use; my only problem is that sometimes it is difficult to collapse one side.
6) Submitted by
Charles Moeller, from Ortonville, MN
on 2/11/2008
Customer Rating:
The brackets appeared to be on the light side, but after I installed them, they functioned adequately.
I used them for a folding workspace in my small computer room. I can raise the table to allow room for income tax papers, etc., and fold it down to gain access to a file cabinet.
7) Submitted by
Jon from CA
on 9/21/2007
Customer Rating:
The brackets were well made, although a little on the thin side. I used them in my toy hauler to add additional counter space 24"d x 30"w, part of the problem was the walls are thin and the runners in the wall are not evenly spaced so I had to offset one side. To correct the side to side shift I used a table lock part #31674 on the bottom to hold the new counter to the old counter. no problem with holding weight, folds up nice.
"Recieved our order of glass and wire mesh. All items arrived intact, which was no surprise considering the impressive packaging.
I've dealt with what many companies consider appropriate packaging, which, at best is hit-and-miss.
The packaging methods you folks employ are second to none.
Thank you.
J.J.Marchese" -
J.J.M.
- 03/02/2009 See more...
CART
(2.7)
