1) Submitted by
Seth, from Seattle, WA
on 10/29/2009
Customer Rating:
I used two of these to hang a coat rack and they worked great. Finding screws wasn't difficult at all (despite other reviewer's comments). Just went down to the local hardware store and tried a few until I got just the right ones.
2) Submitted by
Mike, from Atlanta, GA
on 6/5/2009
Customer Rating:
Good stuff. Worked will hanging a headboard.
3) Submitted by
Karl, from Corpus Christi, TX
on 5/16/2009
Customer Rating:
Worked well hanging a headboard. A little tricky to mount. After first leveling, tracing and measuring the headboard I screwed in the bottom bracket to the wall and used double sided tape on the top bracket to attach to the headboard. Slid on easily afterwards. Use #6 tapered head screws for the larger mounts and #4 screws for the smaller flush mounts. Would have appreciated there be screws and instructions in the package.
4) Submitted by
Armando Martin, from Miami Lakes, FL
on 12/31/2008
Customer Rating:
We used your product to hang a (very heavy) bed headboard. Two z-clips is all we used and they are holding OK. We could not use more because they have little tolerance and using 4 would have been very difficult. However, we were lucky we hung the headboard in the first try! Part of the problem was that the headboard weights 60lbs.
I was impressed by Rockler, I saw the z-clip in a magazine 10 years ago and wanted to use it for this application, but I could not find it until the Internet and your website made it possible. Good job!
5) Submitted by
Kevin, from LaGrange, IL
on 8/6/2008
Customer Rating:
I wanted to hang a very heavy tri-fold mirror to a wall and took a chance on these thin flush mounts. For an easy and accurate installation, I installed the mounts on the back of the mirror first, then traced those mounts onto a piece of posterboard and used the posterboard to position the wall mounts. They hold an impressive amount of weight with confidence, but there are no fasteners (or information on the proper size fastener to use) included with the set. So, not a complete solution and the buyer still has some leg-work to do.
6) Submitted by
Tom Juliano, from Halesite, NY
on 7/29/2008
Customer Rating:
I used this product to hang a large heavy mirror. Works great.
7) Submitted by
Eric, from Portland, OR
on 6/7/2008
Customer Rating:
I just used these to install my bed headboard to the wall. They worked perfectly and stayed in place. It's a little tricky to install. The best way I found to install these were to attach the brackets to the headboard first. I then took a flat head screwdriver and pried the latch out to make it easier to slip into the other bracket. I then held it in place and marked the wall. Once I installed the brackets on the wall, I slipped the headboard into place and pulled the headboard down and it snapped into place. It's amazing how much weight these little brackets can hold.
"I use Rockler catalog & Internet. I've been a customer for a long time, and plan to continue for another. I recycle my catalogs, not through a program, I pass them on to others I know who might have use for them, or leave them in my doctors office for others to look at." -
Mike LaFollette Clearwater FL
- 05/14/2009 See more...
CART
