Woodmaster Exterior Deck Screws

Woodmaster exterior screws are now offered in 500 packs for deck projects!

Rated for 500 hours of salt spray protection Maintains its silvery brilliance after years of exposure. Offers excellent paint and stain adhesion.

Features durable Ulta Seal finish for tough exterior conditions. Offers excellent paint and stain adhesion. Heat treated steel makes the screw exceptionally strong. Self-countersinking nibs eliminate pre-boring. Available in two sizes. Specially designed cut point acts like a saw blade through wood, "pulverizing" the material as the screw is driven. Thread design reduces splitting and driving torque by as much as 30% compared to other screws. Heat-treated steel makes the screw exceptionally strong. Self-countersinking nibs eliminate pre-boring. Serrated Lo-Root® threads offer exceptional holding power.

Customer Reviews and Photos for: Woodmaster Exterior Deck Screws Average Rating: (3.3) (3 customer reviews) Add your review...

1) Submitted by Norm Ballas, from Tularosa, NM on 12/8/2007 Customer Rating: I build outdoor quality cedar furniture. After trying the 8x3 screws, these are the only screws I will use.

2) Submitted by Robert Niemitalo, from Longmont, CO on 11/15/2008 Customer Rating: I purchased these screws in 2005 to repair an exterior plant shelf. Three years later I had to repair the shelf again due in part to the significant deterioration of the screws. Given Colorado's dry climate versus the advertised resistance to 500 hours of salt spray, I expected these screws to last far longer. As a point of comparison exterior screws I used on a deck project during the same time frame have shown little sign of wear. Editor's Note: If plant fertilizers were used for the plants there is a possiblility that a chemical reaction occured that contributed beyond the tested limit for salt spray.

3) Submitted by Frank Borunda, from Safford, AZ on 6/10/2008 Customer Rating: I used about 1500 #8x3"s on 2x6 kiln dried pine exterior deck this Woodmaster screws are easy to drive and easy on your screw gun, if lumber is not perfectly flat use clamps because these screws will not draw tight.