Get the highest degree of accuracy with this combination Master Plate and Super
Bar. Together, they help you tune-up, calibrate, and align your table saw to
within 1/1000 of an inch! What's more, it promotes safer operation by helping
to eliminate kickbacks, sticking, and binding. The master plate is made of solid
1/4'' thick, flat-ground aluminum. It replaces your saw blade and bolts into
a 5/8'' or 1'' arbor to provide a full 10'' of near-perfect flatness for aligning
your equipment. The Super Bar jig has an-onboard precision dial indicator that
measures alignment as it slides in the miter gauge slot. This enables you to
keep the saw blade parallel, align the fence, square tour protractor, and check
runout on routers, drill presses, and more!
1) Submitted by
Paul Evans, from Aston Twp., PA
on 11/8/2009
Customer Rating:
I purchased a new Steel City table saw. Instructions said all settings were set at factory and no adjustment was necessary. Every setting was ok except for 90 and 45 degree cuts. I tried everything the instructions said to do but still got burning and bad 90 and 45's. I than decided to purchase the Super Bar with Master Plate set. When it arrived I followed the directions and boy, what a difference. All my angles and cuts are right on and now I get very little burning when cutting cherry. Best money I ever spent. I recommend this set highly.
"My new favourite store!
I just finshed my very first woodworking project (A workbench of course...couldn't do much without it!) and I can honestly say I did it mistake-free because of the advice from Charlie at the Rockler Store on S.Lyndale Ave. in Minneapolis.
He sold me what I needed, not what I thought I needed. (which would have been about twice as much!) He was very patient with all my questions, and gave me great advice on how to do things.
These folks are knowledgable and extremely helpful.
Charlie & Rockler - Thank You for all your help and all your future help!
- A new loyal customer." -
Jeff Power
- 09/21/2008 See more...
CART
