Rockler Router Bit Profiles We’ve expanded our line with these new profiles! Features include:
• K10 and K20 grade carbide for clean cutting action.
• Final sharpened with 600 grit diamond wheels.
• Precision balance for smooth operation.
• Baked-on coating to reduce pitch and resin build-up.
• Unconditionally guaranteed!
Dia.
Height
Shank
1-3/8''
3/8''
1/2''
If
you are not 100% satisfied with these bits, send them back for a refund.
Router
Safety Tips:
It's easy to prevent mishaps if you take a few simple precautions.
1) Rockler recommends using 1/2'' shank router bits whenever possible.
1/2'' shanks provide better stability with less vibration to produce a smoother
cut and longer cutter life. 2) Make multiple light passes rather than one heavy cut. 3) Install your router bit so that 90% of the shank is inside the
collet. Here's a rule of thumb: fully insert the bit, then pull it back
1/16 to 1/8 of an inch. 4) Use a router table whenever possible. 5) When using large diameter bits, reduce the RPM of your router.
Then test your set-up on scrap lumber. 6) Always follow your router manufacturer's recommendations.
There are no customer reviews or photos for this product yet.
If you have used this product,
please click here
and tell us about it.
If you've used this product in a project,
we'd love to see a photo of your finished project.
You can post that here as well.
"JUST CANT BEAT THE SHIPPING SPEED! AMAZINGLY FAST . THIS STORE HAS EVERYTHING YOU CANT FIND ANYWHERE ELSE . DONT GO ANYWHERE ROCKLER, WE ALL NEED YOU! THANK YOU FOR THE GREAT SERVICE." -
Rick
- 12/15/2008 See more...
CART
If
you are not 100% satisfied with these bits, send them back for a refund.
