Related Products
|
|
|
|
|
 |
- Overview
- More Info
- Reviews
You’ll be able to handle almost any load with our heavy-duty Roller Stand! It's ideal for use with wide or long stock on table saws, band saws, planers and drill presses.
Customer Reviews and Photos for:
Rockler Heavy-Duty Roller Stand
|
Average Rating:
(4.7)
(11 customer reviews)
Add your review...
|
|
|
1) Submitted by
Forrest Bonner, from Huntington Beach, CA
on 9/28/2009
Customer Rating: 
I, too, have a Shopsmith and use these roller stands to give me a level, sturdy base to support the majority of the plywood thru the saw. They are very sturdy, do not move around under pressure, and the foot leveling feature is a nice touch. That I need when setting up 6 of them to support 4x8 plywood that I use as an assembly table. Like many, my workshop is my garage and my inspiration (wife) needs to park her car at night.
|
|
2) Submitted by
Doug Chadwick, from Aubrey, TX
on 9/1/2009
Customer Rating:
I had several full sheets of 3/4" plywood that I needed to rip into smaller pieces for a project. I have several other projects lined up that will need similar cutting of wide or long stock. After researching several different stands, these seemed the most applicable for me. They arrived in good shape thanks to the substantial packaging (they're heavy!), and worked great for me. I asked my (no-woodworker) wife to help me lift and steady the 4X8 sheets , and we made several cuts using my Shopsmith. These rollers were stable and smooth and really helped with this project. Since using them on this project, I've looked at a number of smaller, lighter roller stands at box stores, and am even more pleased with the quality, durability and utility of these heavy-duty stands. Quality always costs less.
|
|
3) Submitted by
Frank from NJ
on 8/31/2009
Customer Rating:
Rock solid. excellent finish, heavy duty height adjusting handle. This stand is the best I own. Not a lightweight, but I'll trade weight for stability and strength any day.
|
|
4) Submitted by
Gary Bass, from Mount Airy, MARYLAND
on 5/18/2009
Customer Rating: 
The roller stand was shipped quickly and was as advertised.It folds for pretty flat for storage,thats a plus for me because I have limited space.
|
|
5) Submitted by
Chris Kirk, from Gainesville, GA
on 3/19/2009
Customer Rating:
The fit and finish are excellent. The bearings on the roller are great - this thing spins for a LONG time when you spin it with your hand. It's heavy enough that it won't get knocked over when feed stock pushes up against it. Did I mention that it came fully assembled? This item may be the single most pleasant surpise of anything I have ordered from Rockler! Really a great item.
|
|
6) Submitted by
Jim Forney, from New Carlisle, IN
on 12/13/2008
Customer Rating: 
This roller stand works just as advertised. However, the markings to level the base would serve better if they could be viewed from above and not at floor level.Also the markings are very hard to read as they are the same color as the base itself. White letters might be a good choice. Also it would be helpful to add markings to the vertical post to preset the height of the roller. I super-glued a sewing tape to mine. A method to precisely raise and lower the roller with one hand would provide additional flexibility to the system.
|
|
7) Submitted by
Ken Carby , from Kosciusko, MS
on 2/12/2008
Customer Rating:
I bought this roller stand to adjust thr width on my exterior doors with my joiner. the joiner I have only has a 48" bed so I used the roller stand to put behind the joiner and was able to level it to the the joiner bed and it worked perfect. Very stable product. I also use the ball bearing type and enjoy using both.
|
See all
11 reviews...
|
Home  Power Tools and Shop Accessories Roller and Ball Bearing Stands Rockler Heavy-Duty Roller Stand
|
|
CART
