Roller Support with Universal Clamp

Our exclusive roller support gives you all the support you need in the shop or on the job site! You’ll get perfectly level alignment and support for any outfeed application on any tool in your shop. Innovative clamp easily attaches to any sawhorse built with either horizontal or vertical 2x’s (2x4, 2x6, etc.). Plus, rotating roller head accommodates any setup!

Unique 3" low profile allows the roller support to be clamped on a workbench or saw horse for use with chop saws and planers. Roller can be adjusted side to side for a full 11" support over the bench from the edge. Features 1-1/2" x 17" steel ball bearing roller with spring-loaded axle and side-to-side adjustability for workbench applications. Height adjustment from 3" to 15-5/16". With 90-lb. weight capacity. Patented.

Position your roller exactly where you need it!

Allows you to get perfectly level alignment as well as support for any outfeed application.

Roller adjusts in three directions!

Reposition Roller
at 90 Degrees
Roller head can be rotated 90 degrees to align correctly in any direction.

Roller Extension
Roller can be shifted side to side in either direction for up to 11'' of support over a workbench.

Roller Height Adjustment
Roller lowers to 3'' above table — ideal for chop saws and planers mounted on a bench! Roller can also be extended up to 15-5/16''

Horizontal Application	Vertical Application	Easy Storage Easily hangs on the wall for storage, giving you quick access to this do-everything stand!
Clamps easily to any sawhorse built with any size 2x material (2x4, 2x6, etc.) either horizontally or vertically, or on workbenches up to 2-1/2'' thick.

Works in a variety of shop applications!

Workbench Band Saw	Workbench Table Saw	Workbench Planer
Sawhorse Chop Saw	Workbench Chop Saw	Workbench Drill Press

Customer Reviews and Photos for:
Roller Support with Universal Clamp

Average Rating:

(4.2)
(14 customer reviews)
Add your review...

1) Submitted by Tom Bankers, from Cedar Rapids, NE on 11/8/2009

Customer Rating:

These roller supports are well made and are very handy in the shop. I have a small shop and many bench top style tools. The roller supports effectively add the needed table length and width to make the smaller versions of good tools work well. I especially like them with my jointer and router. I would like to see the height adjustment shaft be longer and round. A round shaft would give you an additional adjustment that may come in handy. I would recommend this product.

2) Submitted by LStockert, from Bismarck , ND on 6/12/2009

Customer Rating:

Excellent Product - Add a 2-1/2" x 1-1/2" to the face of your bench to create a 2-1/2" Shelf the length of the bench - Allows you to move the camp wherever you need it along the entire bench.

The product would be better if the square tube shaft for vertical height adjustment was 28" long instead of the 15" - Or if they offered a longer one (28" long) as an optional piece.

Other than that - what wonderful service Rockler and Speed-e offers. I am impressed!

3) Submitted by Ronald Whitney, from Maple Plain, MN on 2/5/2009

Customer Rating:

I would rate this product excellent if it came with any sort of a users guide. The only instructions that came with mine were on the box which is a little large to store in my file cabinet for future reference. I am very impressed with the quality and versatility of this roller support.

4) Submitted by Terry Schneider, from Tallahassee, FL on 11/27/2008

Customer Rating:

This little guy is perfect. No more stacking cut offs under long boards. Yahoo!

5) Submitted by Greg Little, from Prairieville, LA on 5/25/2008

Customer Rating:

I needed something adjustable to use for additional support when using my drill press. I frequently drill in long boards and have previously used blocks and clamps attached to my wotkbench next to the drill press. The Rockler roller support has been very useful and I used it on a project just a few minutes after unpacking it.

6) Submitted by Stan Macchione, from Draper, UT on 4/17/2008

Customer Rating:

When cutting various lengths of wood on any of my saws that's mounted on one of my work bench’s I found that I was supporting the other end of the material with wood blocks but, the blocks only gave me several inches of working surface with vibration’s from the saw the other end would slip off the wood blocks. I committed a wood shop crime...I found I was spending more time stacking wood blocks, paying more attention at the other end of the material, making sure the material was staying on the wood blocks instead of watching what I was doing with the saw itself which is a major safety hazard.
Since I purchased and used both of my Roller Supports, I found the materials is much easier to feed, I have 100 percent attention on the saw/materials and what I’m doing, the materials are supported all the time and another great function, the rollers can be moved from side to side which is another benefit when working with bench top saws.

7) Submitted by Larry, from Shelburne , MA on 3/16/2008

Customer Rating:

First the Rollers(2) were not shipped (something else came instead) simple mistake. Then when they finally arrived the plastic end caps on the rollers were broken and in the box. These end caps help keep dust and debris out of the bearrings. So now I am waiting for them to replace these. Other than the end caps these seem to be made well and can't wait to use them.

See all 14 reviews...

Customer Reviews and Photos for:Roller Support with Universal Clamp

ALSO VISIT:

Customer Reviews and Photos for:
Roller Support with Universal Clamp