Top quality bits that meet the high demands of Rockler Woodworking and Hardware.
ROUTER BIT DIMENSIONS
Two flutes, with upper ball bearing guide.
Item No.
A
B
C
D
R1
R2
91414
7/8"
1/2"
1/4"
1-37/64"
5/32"
7/32"
A fantastic value on high quality router bits. These bits are competitively priced while offering high performance and long life.
Quality performance features include:
K10 and K20 grade carbide for clean cutting action.
Final sharpening with 600 - 800 grit diamond wheels.
Precision balanced for smooth operation.
Baked-on anti-stick coating to reduce pitch and resin buildup.
If you are not 100% satisfied with these bits, send them back for a refund.
These
larger bits are designed to be used in a router
table.
Router Bit Set-Up Jigs - Set your
router bit to the precise height every time! Simply bring the router bit up through
the table and align the jig with the cutting edge of the bit.
Router
Safety Tips:
It's easy to prevent mishaps if you take a few simple precautions.
1) Rockler recommends using 1/2'' shank router bits whenever possible.
1/2'' shanks provide better stability with less vibration to produce a smoother
cut and longer cutter life. 2) Make multiple light passes rather than one heavy cut. 3) Install your router bit so that 90% of the shank is inside the
collet. Here's a rule of thumb: fully insert the bit, then pull it back
1/16 to 1/8 of an inch. 4) Use a router table whenever possible. 5) When using large diameter bits, reduce the RPM of your router.
Then test your set-up on scrap lumber. 6) Always follow your router manufacturer's recommendations.
1) Submitted by
Marty, from Tupelo, MS
on 12/12/2008
Customer Rating:
I am working on a set of Kitchen Cabinets for a house that is being built by a local church for a member couple. He is a Vietnam Veteran and both he and his wife are disabled. Their house was in poor condition and the folks of the church raised the money and the volunteers to build them a new house. I asked if I could build the the cabinets. The church bought the materials and a local boy is doing the leading a group of men and scouts for his Eagle project. I will be the lead cabinetmaker and with his helpers we hope to get the cabinets completed before Christmas. I hope we get it done by then or really soon there after. This router bit will be used to make the doors have a look of a raised panel. I always have liked Rockler router bits and find the quality hard to beat.
"I ordered a replacement part for a desk at home. It is actually better quality than the original and fit perfectly! I called to make sure the package had the number of parts I needed prior to placing my online order. The folks were very helpful and the part came within a few days! I will definitely use them in the future! " -
Judy C.
- 09/29/2008 See more...
CART
Two flutes, with upper ball bearing guide.
If you are not 100% satisfied with these bits, send them back for a refund. 
These
larger bits are designed to be used in a 
