Rockler Router Bit Profiles We’ve expanded our line with these new profiles! Features include:
• K10 and K20 grade carbide for clean cutting action.
• Final sharpened with 600 grit diamond wheels.
• Precision balance for smooth operation.
• Baked-on coating to reduce pitch and resin build-up.
• Unconditionally guaranteed!
Dia.
Height
Shank
1-3/8''
3/8''
1/2''
If
you are not 100% satisfied with these bits, send them back for a refund.
Router
Safety Tips:
It's easy to prevent mishaps if you take a few simple precautions.
1) Rockler recommends using 1/2'' shank router bits whenever possible.
1/2'' shanks provide better stability with less vibration to produce a smoother
cut and longer cutter life. 2) Make multiple light passes rather than one heavy cut. 3) Install your router bit so that 90% of the shank is inside the
collet. Here's a rule of thumb: fully insert the bit, then pull it back
1/16 to 1/8 of an inch. 4) Use a router table whenever possible. 5) When using large diameter bits, reduce the RPM of your router.
Then test your set-up on scrap lumber. 6) Always follow your router manufacturer's recommendations.
There are no customer reviews or photos for this product yet.
If you have used this product,
please click here
and tell us about it.
If you've used this product in a project,
we'd love to see a photo of your finished project.
You can post that here as well.
"My wife found this store for me and now we both use it whether we drive up to San Berdo or use the internet. Either way these people take great care of you. So tell your friends and family you found the right place for your wood working needs!" -
doug
- 09/09/2009 See more...
CART
If
you are not 100% satisfied with these bits, send them back for a refund.
