Each bit has just the right '' degree'' of angle to create the number of segments desired.
Plus, the segments will align perfectly for a professional –looking project, 1'' cutter height,
1/2'' shank.
Top quality bits that meet the high demands of Rockler Woodworking and Hardware.
A fantastic value on high quality router bits. These bits are competitively priced
while offering high performance and long life.
Quality performance features include:
K10 and K20 grade carbide for clean cutting action.
final sharpening with 600 - 800 grit diamond wheels.
Precision balanced for smooth operation.
These larger bits are designed to be used in a router table.
If
you are not 100% satisfied with these bits, send them back for a refund.
Router
Safety Tips:
It's easy to prevent mishaps if you take a few simple precautions.
1) Rockler recommends using 1/2'' shank router bits whenever possible.
1/2'' shanks provide better stability with less vibration to produce a smoother
cut and longer cutter life. 2) Make multiple light passes rather than one heavy cut. 3) Install your router bit so that 90% of the shank is inside the
collet. Here's a rule of thumb: fully insert the bit, then pull it back
1/16 to 1/8 of an inch. 4) Use a router table whenever possible. 5) When using large diameter bits, reduce the RPM of your router.
Then test your set-up on scrap lumber. 6) Always follow your router manufacturer's recommendations.
Customer Reviews and Photos for: 15° Chamfer Router Bit
1) Submitted by
Eugene Montgomery, from Ellicott City, MD
on 2/13/2009
Customer Rating:
I received the bit very fast, used it, it worked great. I built an 8 sided,cone shaped roof for a birdhouse. Great product. Thank you.
CART
If
you are not 100% satisfied with these bits, send them back for a refund.
(5.0)
