Each bit has just the right '' degree'' of angle to create the number of segments desired.
Plus, the segments will align perfectly for a professional -looking project, 1'' cutter height,
1/2'' shank.
Top quality bits that meet the high demands of Rockler Woodworking and Hardware.
A fantastic value on high quality router bits. These bits are competitively priced
while offering high performance and long life.
Quality performance features include:
K10 and K20 grade carbide for clean cutting action.
final sharpening with 600 - 800 grit diamond wheels.
Precision balanced for smooth operation.
These larger bits are designed to be used in a router table.
If
you are not 100% satisfied with these bits, send them back for a refund.
Router
Safety Tips:
It's easy to prevent mishaps if you take a few simple precautions.
1) Rockler recommends using 1/2'' shank router bits whenever possible.
1/2'' shanks provide better stability with less vibration to produce a smoother
cut and longer cutter life. 2) Make multiple light passes rather than one heavy cut. 3) Install your router bit so that 90% of the shank is inside the
collet. Here's a rule of thumb: fully insert the bit, then pull it back
1/16 to 1/8 of an inch. 4) Use a router table whenever possible. 5) When using large diameter bits, reduce the RPM of your router.
Then test your set-up on scrap lumber. 6) Always follow your router manufacturer's recommendations.
Customer Reviews and Photos for: 22.5° Chamfer Router Bit
1) Submitted by
Kevin Brinker, from Carroll, IA
on 9/28/2009
Customer Rating:
This is an excellent bit for the money especially with the 1/2" shank. I chose this bit over other similar ones because of the 1" length of cut that I needed to mill flats on 4x4 posts for constructing a gazebo.
2) Submitted by
Jay, from midland , TX
on 8/12/2008
Customer Rating:
This is a really good value. It cuts wood as if were butter and 15mm Phenyl resin panels with ease. It is a long lasting bit even for industrial use. Make sure the bearing screw is tight before each use.
"I just do not know what to say about ROCKLERs above and far beyond customer service except for a simple thank you which doesnt begin to even start but thank you (everyone at ROCKLER) so much for all that you do. To potential customers, if you do not go to ROCKLER, you should have because you will not be getting the best in the business. Thanks again ROCKLER. Harry & Harry SLC, UT" -
Harry & Harry SLC, UT
- 08/14/2009 See more...
CART
If
you are not 100% satisfied with these bits, send them back for a refund.
(5.0)
