Stile and rail router bits for beautifully crafted frames. Rockler stile and rail bit sets are manufactured to exacting standards and create perfectly matched cope and stick joints.
ROUTER
BIT DIMENSIONS
Two
flutes, Ball bearing guide * Bearing 5/8"
Item
No.
A
B
C
D
92013
1-3/8"
1"
1/2"
1-1/2"
Top
quality bits that meet the high demands of Rockler Woodworking
and Hardware. A fantastic value on high quality router bits.
These bits are competitively priced while offering high performance
and long life.
Quality performance features include:
K10 and K20
grade carbide for clean cutting action.
Final
sharpening with 600 - 800 grit diamond wheels.
Precision
balanced for smooth operation.
Baked-on
anti-stick coating to reduce pitch and resin buildup.
Get
a great deal on these superior bits!
Buy 3 or more and get 10% off, or buy 6 or more and get 15% off.
If
you are not 100% satisfied with these bits, send them back for
a refund.
These
larger bits are designed to be used in a router
table.
Router Bit Set-Up Jigs - Set your
router bit to the precise height every time! Simply bring the router bit up through
the table and align the jig with the cutting edge of the bit.
Router
Safety Tips:
It's easy to prevent mishaps if you take a few simple precautions.
1) Rockler recommends using 1/2'' shank router bits whenever possible.
1/2'' shanks provide better stability with less vibration to produce a smoother
cut and longer cutter life. 2) Make multiple light passes rather than one heavy cut. 3) Install your router bit so that 90% of the shank is inside the
collet. Here's a rule of thumb: fully insert the bit, then pull it back
1/16 to 1/8 of an inch. 4) Use a router table whenever possible. 5) When using large diameter bits, reduce the RPM of your router.
Then test your set-up on scrap lumber. 6) Always follow your router manufacturer's recommendations.
1) Submitted by
Hal , from Crownsville, MD
on 5/27/2009
Customer Rating:
These bits work great. After reading a lot about making doors, I decided I would give it a shot. The first set on scrap was very close and the second set on the project wood was perfect! The setup gauge is a definite time saver and a recommended co-purchase.
2) Submitted by
Frank S., from Commerce City, CO
on 10/30/2007
Customer Rating:
I had a project which required a custom built cabinet that had to match the existing store bought cabinets. The Rockler bit set was an exact match for the stile and rail layout I needed. The bits were of excellent quality and made the project go very smoothly with superb results.
3) Submitted by
H.W. Guyer, from Euless, TX
on 6/22/2008
Customer Rating:
The bit set worked fine, cuts matched and cut smooth. However, I am mystified why there is a bearing on these bits as it can never touch the wood for 3/4" door stock.
Editor's note: The bearing on these bits is only used when running against a template for making a curved shape such as the top of arched top door. For straight cuts one guides against the router table fence and the bearing contact is therefore not needed for straight cuts.
4) Submitted by
Loren L Loibl, from Omaha, NE
on 4/28/2008
Customer Rating:
I actually ordered the wrong set and had to order a different set. The new set I ordered worked perfectly and I achieved the results that I wanted. I'm in the process of replacing cabinets doors and drawers for a friend of ours and she was very pleased with the results.
"Your service is the best. You had my entire order in stock which is hard to find anymore. I ordered on Monday and had it Tuesday. Wow. Thank you so much for being first class." -
Terry Rasmussen
- 06/09/2009 See more...
CART
Two
flutes, Ball bearing guide * Bearing 5/8"
Get
a great deal on these superior bits!
If
you are not 100% satisfied with these bits, send them back for
a refund. 
These
larger bits are designed to be used in a 
