Everything you need to make raised panel doors in a handy wooden case. Set includes bead edge stile and rail router bits and ogee profile vertical raised panel bit.
Includes ogee stile vertical bit #21130
and bead stile rail/stile bits #91947.
Top quality bits that meet the high demands of Rockler Woodworking and Hardware.
A fantastic value on high quality router bits. These bits are competitively
priced while offering high performance and long life.
Quality performance features include:
K10 and K20 grade carbide for clean cutting action.
final sharpening with 600 - 800 grit diamond wheels.
Precision balanced for smooth operation.
If
you are not 100% satisfied with these bits, send them back for a refund.
Router
Safety Tips:
It's easy to prevent mishaps if you take a few simple precautions.
1) Rockler recommends using 1/2'' shank router bits whenever possible.
1/2'' shanks provide better stability with less vibration to produce a smoother
cut and longer cutter life. 2) Make multiple light passes rather than one heavy cut. 3) Install your router bit so that 90% of the shank is inside the
collet. Here's a rule of thumb: fully insert the bit, then pull it back
1/16 to 1/8 of an inch. 4) Use a router table whenever possible. 5) When using large diameter bits, reduce the RPM of your router.
Then test your set-up on scrap lumber. 6) Always follow your router manufacturer's recommendations.
1) Submitted by
Kenneth Buchanan, from Farmington Hills, MI
on 2/7/2008
Customer Rating:
This was my first project using a router for raised panel doors. Everything worked great and we have been very happy with the final results.
"Oh how I wish there was a Rockler someplace close to my home. I've bought so much since I found out about them on-line that they are a permanent "button" on my desktop." -
Mike Ryan
- 08/30/2009 See more...
CART
If
you are not 100% satisfied with these bits, send them back for a refund.
