Rockler Router Bit Sets

Choose from five affordable router bit sets - all with K10 and K20 grade carbide for clean cutting action and final sharpened with 400 grit diamond wheels for longer cutting life. All with 1/4'' shanks.

Straight Bit Set Features the four most commonly used straight bits, including 1/4'', 3/8'', 1/2'' and 3/4'' size bits. Roundover/Beading Bit Set Includes bearing to convert all bits from roundover to beading, giving you six options! Includes 1/8'', 1/4'' and 3/8'' radius bits. Plywood Bit Set Includes the three most common sizes of straight bits for undersized plywood: 23/32'' for 3/4'' plywood, 31/64'' for 1/2'' plywood, and 15/64'' for 1/4'' plywood. Rabbeting Bit Set Includes bit and bearing soft 5/16'', 3/8'', 7/16'' and 1/2'' rabbets. Allen wrench included. Biscuit Cutter Set Includes cutter and all three bearings to cut biscuit slots for 0, 10 and 20 size biscuits. All have baked-on Teflon coating to reduce pitch and resin buildup. With unconditional guarantee! If you are not 100% satisfied with these bits, send them back for a refund. Router Safety Tips: It's easy to prevent mishaps if you take a few simple precautions. 1) Rockler recommends using 1/2'' shank router bits whenever possible. 1/2'' shanks provide better stability with less vibration to produce a smoother cut and longer cutter life. 2) Make multiple light passes rather than one heavy cut. 3) Install your router bit so that 90% of the shank is inside the collet. Here's a rule of thumb: fully insert the bit, then pull it back 1/16 to 1/8 of an inch. 4) Use a router table whenever possible. 5) When using large diameter bits, reduce the RPM of your router. Then test your set-up on scrap lumber. 6) Always follow your router manufacturer's recommendations.

Customer Reviews and Photos for: Rockler Router Bit Sets Add your review... There are no customer reviews or photos for this product yet. If you have used this product, please click here and tell us about it. If you've used this product in a project, we'd love to see a photo of your finished project. You can post that here as well.