Related Products
|
- Overview
- More Info
- Reviews
Both the panel, rail and stile bits all in one convenient box.
 These
larger bits are designed to be used in a router
table.
Router Bit Set-Up Jigs - Set your
router bit to the precise height every time! Simply bring the router bit up through
the table and align the jig with the cutting edge of the bit.
Router
Safety Tips:
It's easy to prevent mishaps if you take a few simple precautions.
1) Rockler recommends using 1/2'' shank router bits whenever possible.
1/2'' shanks provide better stability with less vibration to produce a smoother
cut and longer cutter life.
2) Make multiple light passes rather than one heavy cut.
3) Install your router bit so that 90% of the shank is inside the
collet. Here's a rule of thumb: fully insert the bit, then pull it back
1/16 to 1/8 of an inch.
4) Use a router table whenever possible.
5) When using large diameter bits, reduce the RPM of your router.
Then test your set-up on scrap lumber.
6) Always follow your router manufacturer's recommendations. |
|
| |
 |
|
Customer Reviews and Photos for:
Horizontal Panel Router Bit Set With Wooden Case
|
Average Rating:
(4.3)
(5 customer reviews)
Add your review...
|
|
|
1) Submitted by
Jason Lore, from Turlock, CA
on 11/8/2008
Customer Rating: 
The router bit set produces a quality finished product. The sale price I bought the set for was hard to pass up.
|
|
2) Submitted by
Richard Shoemaker, from Fredericktown, MS
on 3/19/2008
Customer Rating: 
I was amazed at the ease of the setup wth jig and arched template.
|
|
3) Submitted by
Jed, from Richmond, VT
on 8/24/2006
Normally, I find Rockler to be among the best quality around. I'm not an expert woodsmith, but I've got a fair amount of experience. For 2 years, I've had this bit-set, and always figured that the problems I had with the joint were "operator error", not the fault of the bit-set.... Until I used a set of my father's.
On the Rail and Stile bits, the bearing is placed in the wrong spot.. by having it on the end of the bit, it's not in a useful spot for normal wood thicknesses. You need to be using wood greater than 1" thick for the bearing guides to help you, otherwise, they miss the workpeice entirely, requiring you to rely on your fence. Even with the best alignment of the fence, I get sniping.
In contrast, my father's bit set has the bearing in the middle of the cutter, which is much more effective.
Editor's note:
For 3/4" stock the bearing on the stile/rail cutters is only used when following a template, such as when doing an arched top. The fence of the router table is used for straight cuts on 3/4" stock. Our Rail Coping Jig 28595 can be used to eliminate tearout.
|
|
4) Submitted by
John Smith, from Norman, OK
on 11/6/2008
Customer Rating: 
I wasted alot of wood and time before figured out the set-up. Needed more info(didn`t have any) on the set up. It works very good, after I mastered the set-up. First time I ever used a set-up like this.
|
|
5) Submitted by
Steve Duerr, from Shandaken, NY
on 8/24/2008
Customer Rating:
Sorry Jed...It's user error,nothing else.
|
Home  Power Tools and Shop Accessories Routers and Accessories Router Bits Router Bit Sets Horizontal Panel Router Bit Set With Wooden Case
|
|
CART
Two flutes, Ball bearing guide 
Two flutes, Ball bearing guide * Bearing 5/8"
Get a great deal on these superior bits!
If you are not 100% satisfied with these bits, send them back for a refund. 
