Top quality bits that meet the high demands of Rockler Woodworking and Hardware.
ROUTER
BIT DIMENSIONS
3
flutes, Solid Carbide
Item
No.
A
B
C
D
Degrees
91428
19/32"
33/64"
1/4"
1-1/4"
60
deg
A
fantastic value on high quality router bits. These bits are
competitively priced while offering high performance and long
life.
Quality performance features include:
K10
and K20 grade carbide for clean cutting action.
Final
sharpening with 600 - 800 grit diamond wheels.
Precision
balanced for smooth operation.
Baked-on
anti-stick coating to reduce pitch and resin buildup.
If
you are not 100% satisfied with these bits, send them back for
a refund.
These
larger bits are designed to be used in a router
table.
Router Bit Set-Up Jigs - Set your
router bit to the precise height every time! Simply bring the router bit up through
the table and align the jig with the cutting edge of the bit.
Router
Safety Tips:
It's easy to prevent mishaps if you take a few simple precautions.
1) Rockler recommends using 1/2'' shank router bits whenever possible.
1/2'' shanks provide better stability with less vibration to produce a smoother
cut and longer cutter life. 2) Make multiple light passes rather than one heavy cut. 3) Install your router bit so that 90% of the shank is inside the
collet. Here's a rule of thumb: fully insert the bit, then pull it back
1/16 to 1/8 of an inch. 4) Use a router table whenever possible. 5) When using large diameter bits, reduce the RPM of your router.
Then test your set-up on scrap lumber. 6) Always follow your router manufacturer's recommendations.
Customer Reviews and Photos for: Solid Carbide Signmaking Router Bit
1) Submitted by
Vern Ulrich, from Lewisburg, PA
on 2/3/2008
Customer Rating:
This is only my second 60 degree bit I have purchased but it seems as good as the Amana bit I got from [another source]. I use them pretty hard for my sign making business. This bit was slightly cheaper but a little higher shipping cost made the two bits about the same price for me. It shipped fast and I am pleased so far. []
"I have been buying from Rockler for many years now. I have NEVER had a problem. Merchandise is as advertised, quality is exceptional, price is right, shipping and handling are top-notch. I have recommended Rockler to many friends and colleagues." -
Randy Rudd
- 06/01/2009 See more...
CART
3
flutes, Solid Carbide
If
you are not 100% satisfied with these bits, send them back for
a refund. 
These
larger bits are designed to be used in a 
(4.0)
