Top quality bits that meet the high demands of Rockler Woodworking and Hardware.
ROUTER BIT DIMENSIONS
Bearing 22mm.
Item No.
A
B
C
D
92134
3/8"
1/4
1/4"
1-1/4"
92145
3/8"
1/4"
1/2"
1-1/2"
A fantastic value on high quality router bits. These bits are competitively priced while offering high performance and long life.
Quality performance features include:
K10 and K20 grade carbide for clean cutting action.
Final sharpening with 600 - 800 grit diamond wheels.
Precision balanced for smooth operation.
Baked-on anti-stick coating to reduce pitch and resin buildup.
Get a great deal on these superior bits!
Buy 3 or more and get 10% off, or buy 6 or more and get 15% off.
If you are not 100% satisfied with these bits, send them back for a refund.
These
larger bits are designed to be used in a router
table.
Router Bit Set-Up Jigs - Set your
router bit to the precise height every time! Simply bring the router bit up through
the table and align the jig with the cutting edge of the bit.
Router
Safety Tips:
It's easy to prevent mishaps if you take a few simple precautions.
1) Rockler recommends using 1/2'' shank router bits whenever possible.
1/2'' shanks provide better stability with less vibration to produce a smoother
cut and longer cutter life. 2) Make multiple light passes rather than one heavy cut. 3) Install your router bit so that 90% of the shank is inside the
collet. Here's a rule of thumb: fully insert the bit, then pull it back
1/16 to 1/8 of an inch. 4) Use a router table whenever possible. 5) When using large diameter bits, reduce the RPM of your router.
Then test your set-up on scrap lumber. 6) Always follow your router manufacturer's recommendations.
1) Submitted by
Dick, from Blairsville, GEORGIA
on 10/29/2009
Customer Rating:
The bit worked beautifully. I did have some problems that were related but not the fault of the bit. I would recommend getting the 1/2" shank bit. The 1/4" does the job but didn't feel solid. The bit was hard to adjust in my rounter and even though the cut was excellent the pieces were difficult to fit and I never could get the bit adjusted to the right fit. But the bit itself, which is what we're talking about, made perfect cuts with no tear out or burning. I do think there was play in my rounter that I couldn't do anything about and this caused most of the problems. I'm going to purchase the 1/2" shank bit and put it in a different router and I think that will solve my problem.
2) Submitted by
Ken, from Santos, OH
on 2/16/2008
Customer Rating:
As usual this Rockler bit performed very well--nice smooth cut--will continue to purchase these bits in the future--would recommend to anyone
3) Submitted by
Ted Kloba, from Franklin Park, IL
on 4/22/2009
Customer Rating:
This is a great set for "assembly" tongue-and-groove with a very tight fit. I've even made simple rail/stile/panel doors for a bath vanity.
Two negatives: The set doesn't come with instructions and includes some extra shim washers that I have yet to figure out how or why to use; I see no way to buy replacement cutter heads, and I damaged one cutter accidentally which will force me to buy the whole set again.
Editor's note: Extra shim washers are included in order that one can vary the sizing of a cut if needed.
"Thank you for your exceptional service. I ordered on a Sunday, received an e-mail on Monday telling me the order had shipped, and it was at my front door on Tuesday. Great products and great service." -
[Name withheld]
- 11/26/2008 See more...
CART
Bearing 22mm. 
Get a great deal on these superior bits!
If you are not 100% satisfied with these bits, send them back for a refund. 
These
larger bits are designed to be used in a 
