Polished Nickel Glides

Slides smoothly over most floor types. available in either nail-on or screw on type. Nail on type has 3/4'' long nail. Screw-on glides have 1/4''-20 threading x 1'' long bolt and require1/4''-20 threaded inserts or t-nuts (not included). Polished nickel base with rubber cushion for shock absorption.

Four glides per set

Technical Document for 12295 Technical Document for 18631 Technical Document for 18649 Technical Document for 18657

Customer Reviews and Photos for: Polished Nickel Glides Average Rating: (4.2) (6 customer reviews) Add your review...

1) Submitted by Don, from Vancouver, WA on 3/12/2009 Customer Rating: Excellent quality, well polished to slide on carpet very well. They seem very durable.

2) Submitted by Robert DeHarrold, from Lancaster, CA on 2/22/2008 Customer Rating: I used these on some chair legs that I repaired. They worked perfectly to help create the level condition I was looking for. First I installed a 1/4-20 insert, drilled the legs for relief of the excess thread, then inserted the glides. The project worked flawlessly.

3) Submitted by Irving Zlotnik, from Newhall, CA on 10/4/2009 Customer Rating: This was the second time that I had to order this product. The first time the thread on the screw was defective. I wasted much time and energy trying to make it work. I finally gave up and ordered another set. I installed the new screw OK. Now I have 3 unneeded screws left. Bummer! Otherwise it works fine. Editor's note: Our customer service at 800-279-4441 is available to assist with replacement or reimbursement for any defective item.

4) Submitted by Dick, from Post Falls, ID on 10/17/2009 Customer Rating: Good quality. Didn't notice that the inserts weren't included.

5) Submitted by Dante Laudati, from Elmhurst, IL on 10/25/2009 Customer Rating: I purchased this item in both base sizes because I didn't know which one I would prefer. Having had chairs and tabletop replaced, I needed these to finish the job. I had to cut down three of the four screws because of uneven floor. No problem, I placed a 1/4-20 nut on the threads and after cutting and filing, I backed off the nut to clear the threads.

6) Submitted by Anne Giblin, from Jackson, NJ on 12/3/2007 Customer Rating: The polished nickel glides are wonderful. I no longer deal with a scratched floor, and the chairs move smoothly away from the table even with adults sitting on them.