Attach this edge roller to the back edge of a shelf or drawer. Also can be used as a door protector, slide, or shelf accessory. You'll receive a set of 4 with screws. Measures 5/8 of an inch by 2'' with a 13/16'' projection.
1) Submitted by
Stan Ronk, from Williamsburg, MI
on 11/2/2009
Customer Rating:
I used the edge rollers on the bottom of some small drawers to give lift and easy movement the full length of the drawer travel. Delta disc rollers mounted in the front of the openings provide smooth operation and act as bumpers for the back of the finished drawer fronts. The rollers work very well.
2) Submitted by
Chris Freeman, from Bayside, CA
on 8/11/2009
Customer Rating:
I needed a solution to keep pocket doors from getting scratched in the middle when opening and closing. A set of these rollers hidden back in the framing make the doors glide in and out without wobbling. A very cheap fix for a common problem and it made the installation turn out very nice.
3) Submitted by
Joe Baker, from Stow, OH
on 1/15/2009
I needed a device that would insure a pantry door was open far enough to prevent side mounted slides (mounted on pull out trays) from digging into the back of the door, in cases where the door wasn't opened quit far enough.
The rollers looked like a good way to go. However, I found that these rollers, which are snap fitted into the plastic base, came loose.
I did not rate this product since I'm not sure whether this was one of it's intended purposes.
I would think that any application where the force is directed against the roller and into the base would probably keep the roller in place and work OK.
"I've been looking for a cloth 2-way tape that i can use to hold down nameplates to be engraved! Your product was just what i was looking for :) Your customer service answered my questions professionally and i received my order in a few days! I am very pleased & will do more business in the future :)" -
LIOY SIGNS, INC.
- 10/26/2009 See more...
CART
(5.0)
