Great for sewing machine tables and drop front desks. Made of highest quality solid extruded brass.
These hinges have twin pin joints with steel pins and recessed knuckles on the top for a perfectly flat surface. Solid extruded brass with a polished finish. Standard Hinges are 1-3/16" x 2-3/4". The Narrow Hinges are 1/2'' wide by 3'' long.
Price per pair.
Customer Reviews and Photos for: Twin Pin Sewing Machine Hinges
1) Submitted by
Jr Wood Chuck, from Sweetser, IN
on 10/17/2009
Customer Rating:
I found these hinges to be well constructed. Nice heavy hinges for the job. No reworking needed to make them fit in the mortise.
2) Submitted by
Peggy, from Gulf Breeze, FL
on 6/10/2008
Customer Rating:
Fit our needs perfectly and are very nice quality. Very few sites carry these types of hinges, but this company's had very exacting measurements available on line, they came in pairs, and included screws --very unusual! Processing and shipping my order was very timely. Rockler was very easy to contact by phone and talk to a knowledgable person.
3) Submitted by
Randall Brookhiser, from Ottumwa, IA
on 1/21/2008
Customer Rating:
Perfect part for the application. []
4) Submitted by
Nicholas J Schulz, from Willmar, MN
on 2/19/2009
Customer Rating:
Good hinges, they will work but there is alot of side to side play in the hinge plus I had to file to get the hinge to open the 180.
5) Submitted by
John Van Dam, from Bronson, MI
on 6/22/2009
Customer Rating:
The hinges would not open and lie flat to 180 degrees. Other than that the hinges looked very nice. Filing needs to be done to get the hinges to open flat.
6) Submitted by
Stephen, from Augusta, KS
on 11/3/2007
Customer Rating:
Nice thick hinges with a good finish. My only problem with them is they would not close a full 180 degrees. I had to take a file to the part that stops the hinge from laying flat.
CART
