Made of high quality 10 ounce Shaker felt to capture dust to one micron!
This
material has both high breath ability and excellent dust release - the ratio
of collection is 50 CFM per square foot of cloth. Shaker felt is ''singed''
on the collection side to create the dust cake that actually captures additional
dust.
14'' dia. x 42'' L (for Jet DC 650)
Customer Reviews and Photos for: Shaker Felt Dust Collection Bags
1) Submitted by
Robert Main, from Ellensburg, WA
on 10/25/2009
Customer Rating:
Fit better on my Grizzly 8027 than the original 30 micron bags. The airflow is so efficient that only the top felt bag is needed for air flow, with the original bottom bag used only for collection after being lined with a plastic bag. Price for a similar felt bag elsewhere was almost $100.
2) Submitted by
Doug Wilson, from Lincoln, NE
on 9/16/2009
Customer Rating:
I purchased 2 of the felt bags for my Jet DC-650 to replace the existing 30 micron canvas bags. The new bags are longer than the old bags (42" vs 24"), so the lower bag had to be shortened--but not problem with a seamstress spouse. I have plenty of room overhead for the upper bag. In concert with my garbage can pre-collector, these work nicely in capturing the fine dust that the old bags let escape. Nice healthy change.
3) Submitted by
Mike Schruhl, from Providence, UT
on 12/13/2008
Customer Rating:
I replaced the factory upper bag on my Jet DC-650 with this felt bag from Rockler. It fit perfectly and filters significantly more air that the original one. Before the new bag, my DC was nearly useless and the factory bag would blow up tight like a balloon. After installing the felt bag, my DC is effective and there is very little pressure inside the bag. The bag stands up by itself after the power is turned off, so there is no need to add an external support. It is the best dollars I have spent in a long time.
4) Submitted by
Joe from OH
on 9/14/2008
Customer Rating:
Right on. The bag filters well; the price is right; but the thing is way too tall for the manufacturer's support arm.
5) Submitted by
Joel Reed, from The Woodlands, TX
on 9/26/2007
Customer Rating:
You should include a longer arm to hold this tall bag. The arm that holds up the regular bag is way way too short.
Editor's note: When installing this style of bag the manufacturer's support arm need to be removed from the dust collector. Most folks use a hook, or hook and cord, from the ceiling to secure the taller bag.
6) Submitted by
Ben, from Sound Beach, NY
on 7/5/2008
Customer Rating:
Yes this bag is MUCH taller than the stock unit, making it a full 6' tall. That's where it gets its extra CFM. But the felt is also pretty stiff, so I find that if I run the DC, it self-inflates, and then stays upright after I shut the unit off. No need for a support arm. Maybe once I use it more and more dust clings to the bag, I may need to support it, but for now, I just turn it on and go.
"I have been buying from Rockler for many years now. I have NEVER had a problem. Merchandise is as advertised, quality is exceptional, price is right, shipping and handling are top-notch. I have recommended Rockler to many friends and colleagues." -
Randy Rudd
- 06/01/2009 See more...
CART
This
material has both high breath ability and excellent dust release - the ratio
of collection is 50 CFM per square foot of cloth. Shaker felt is ''singed''
on the collection side to create the dust cake that actually captures additional
dust.
(4.5)
