Dust Grounding Kit

Improve dust collecting safety using this kit. Includes 50 feet of braided bare copper multi-strand wire, two grounding screws, a 3/32'' drill bit, two ring terminals, and five wire connectors. A continous wire from each dust collection point to the dust collector is recommended.

Improve dust collecting safety using this kit. Includes 50 feet of braided bare copper multi-strand wire, two grounding screws, a 3/32'' drill bit, two ring terminals, and five wire connectors. A continous wire from each dust collection point to the dust collector is recommended. Helps reduce static electricity build-up Improves dust collection system safety Wire is run inside of duct work

Related Articles:  Getting Tough on Dust

Technical Document for 18003

Customer Reviews and Photos for: Dust Grounding Kit Average Rating: (4.5) (3 customer reviews) Add your review...

1) Submitted by Frank, from Malone, NY on 11/9/2009 Customer Rating: Definitely a two man job running the wire unless one had a spider monkey that would help pull the wire through the ducts. But I am very satisfied with the results.

2) Submitted by Joe Lee III, from Grenada, MS on 3/21/2008 Customer Rating: Good kit.

3) Submitted by Mike Calo, from Glen Burnie, MD on 4/8/2007 I found that the only thing this wire was good for was to create blockages at several points in my dust collection ducting. Once I removed it everything worked perfectly - and I was out $15.00 bucks. Editor's note: We do not recommend running a dust collection system without proper grounding.