Router Bit Set-Up Jigs

Set your router bit to the precise height every time! Simply bring the router bit up through the table and align the jig with the cutting edge of the bit. This system is ideal for making accurate rail-and-stile construction, lock miter joints and more.

All jigs are manufactured for 3/4" stock. They are made of durable HDPE and measure 2" x 37/8" x 3/4". (Jigs designed for rail-and-stile have the rail cut on one side and the stile cut on the opposing side.)

Technical Document for 53810 Technical Document for 53817 Technical Document for 53825

Customer Reviews and Photos for: Router Bit Set-Up Jigs Average Rating: (4.0) (5 customer reviews) Add your review...

1) Submitted by Jim, from Billings, MONTANA on 4/12/2009 Customer Rating: So far so good. Just wished it would have come with a smooth profile since that is the type of bits I have.

2) Submitted by Bruce, from Wade, NC on 9/24/2008 Customer Rating: Very good simple product, but does have a slight gap when matched to the bits. Does speed up the set up greatly.

3) Submitted by William Seufert, from Snohomish, WA on 9/14/2008 Customer Rating: The jig gets the set up to a point of being almost dead on. I find that I still have to do a little truing up but am very satisfied with the jig.

4) Submitted by Mark, from Shelburne, VT on 10/29/2007 Customer Rating: This is a great product - the best ideas are always the simple ones. One of the issues with raised panels is matching the height of the two cuts. With this simple jig, matching the height of the rail and the stile cut is virtually fool proof.

5) Submitted by Greg, from Sterling, VA on 1/11/2008 Customer Rating: This jig helped me quickly adjust the bit to the appropriate height for cutting the stock. The only reason this is not rated a five is that my bits have a different profile then this jig, which caused a fitting problem.