Kreg Jig® K3 Master System

The Kreg K3 Master System includes everything you need to make perfect pocket holes. Just drill and drive. Finished with your frames? Move right on to drawer installation with the Kreg universal drawer slide mounting jig. This handy jig eliminates all the fuss of measuring and marking. Just push the jig against the cabinet face and drill away! Drawers slide smoothly every time.

Includes K3 drill guide block, benchtop base, portable base, dust collection shroud, material support stop, premium face clamp, 3/8" step drill bit, 6"-#2 driver bit, 3"-#2 driver bit, depth collar, 1/8" Allen wrench, screws, instructional DVD with quick start guide and carrying case. Engineered with convenient, front-side clamping, so you don’t have to reach over the workpiece to get to the clamp. Flip-down, adjustable support stop allows for consistent hole placement every time. Adjustment pins allow you to center a screw in material 1/2'' to 1-1/2'' thick in 1/8'' increments. Entire system packs into a portable, protective case for easy transport and storage.

Kreg Drawer Slide Jig Instructions Kreg K3 Manual (LARGE FILE)

Customer Reviews and Photos for: Kreg Jig® K3 Master System Average Rating: (4.9) (47 customer reviews) Add your review...

1) Submitted by Jim Zaboski, from Danville, CA on 10/9/2009 Customer Rating: Worked great. Attached material 1 1/2" thick. Very easy to use. You must clamp your work while installing screws or the pices will shift. I highly recommend it.

2) Submitted by Audie Boudreaux, from Houma, LA on 10/2/2009 Customer Rating: Great product,makes one of the strongest joints, makes drawer boxes a breeze.

3) Submitted by Mark Buck, from Old Town, ME on 9/10/2009 Customer Rating: I am so glad I got the complete set, it is well worth the small amount extra. After watching the video I was able to use it with great results. Anyone who builds cabinets or furniture really needs this tool and will use it all the time.

4) Submitted by Mike Clemens, from Gig Harbor, WA on 8/15/2009 Customer Rating: There is little about this system that can be improved on. I have cut down my biscuit use by 50% with this system. As with all systems it has its place and is not a complete replacement for dowels or biscuits. It's only draw back is that when you pull the pieces together it tends to offset the joints by about 1/32 inch because of the angle of the screws. If you clamp the parts together you will eliminate the offset.

5) Submitted by Jim Dearing, from Castle Rock, CO on 7/29/2009 Customer Rating: One of the best birthday gifts I've ever received. Woodworking is a hobby and joining has always been a headache. Played with some scraps for about an hour and started to build. Everything I make can now be lighter and stronger.

6) Submitted by G A Walker, from Sodus, NEW YORK on 8/9/2009 Customer Rating: using it to make new ketchen cabinets

7) Submitted by Charles Jensen, from Knoxville, TN on 7/26/2009 Customer Rating: Okay, I read the reviews on the Kreg K3 and was a bit skeptical. I'd never used a pocket hole system before, but was interested based on alleged simplicity and strength, still, things too good to be true..... After receiving it and reviewing the 'getting started' pamphlet, I immediately used it on the front frame for a shop work bench with multiple drawers. Well, fantastic gets overused, but it's totally appropriate in this case. Even the vacuum housing used to capture the shavings, which is usually as much gimmick as functional, worked like a champ with very few shavings escaping. The K4, a more bare bones unit, is likely to be equally effective, but for a few dollars more, the K3 Master is a winner.

See all 47 reviews...

View the Kreg K3 Master System Interactive Demo (requires Flash).

View this Video on the Kreg Pocket Hole System

View Product Demo