1) Submitted by
Vinny McCrum, from Clarksville, TN
on 1/11/2010
Customer Rating:
Due to pull out of the original hammer in tee nuts I had used to construct portions of my granddaughter's folding benches with I had to find a stronger solution. When I saw the screw on tee nuts I knew they were it. I upsized to #8 x 1 1'4" screws versus the #4 screws included for additional strength. The screw on tee nuts provide at least a factor of 10X the pull out resistance of the original tee nuts. Great product and very easy to install!
2) Submitted by
Michael Farrell, from Newburgh, NEW YORK
on 2/11/2009
Customer Rating:
I used the T nuts to repair the legs on a very heavy sofa and a heavy matching stuffed chair. The legs had been anchored in place under the the chair and sofa by anchor bolts. With time and the constant moving of both pieces of heavy furniture, the back legs on both pieces of furniture had come loose. In most cases the anchor bolts had bent and a large hole had developed in the legs and in the furniture. The leges eventually came off.
I used #8 flat head screws to anchor the teenuts in place under the furniture. I felt the screws provided were not stong enough and the #8 screws were a perfect fit for the teenut.
I used longer hanger 3/8in bolts to attach the legs of the chairs to the furniture. The entire process went very quickly once I had the teenuts and the anchor bolts.
3) Submitted by
Richard Burbick, from Sebring, FL
on 4/27/2008
Customer Rating:
I used these in cabinet leveling feet for several shop projects. I replaced the wings on my table saw with a router cabinet on the right side, and a storage cabinet on the left. These leveling feet allowed me to perfectly level my cabinet tops with their lamination so I could attach them to the saw where the wings bolted on, and make everything very flat and level. It looks like an aircraft carrier now!
4) Submitted by
Warren Searls, from Hot Springs Village, AR
on 3/18/2008
Customer Rating:
Look good, are good. Have used over 400 of these screw-on tee nuts on an Arkansas Children's Hospital project. Accompanying screws have gotten better. Last 300 screws didn't have a single failure (no phillips head tear out). Will continue to use Rockler as my source.
5) Submitted by
Scott Johnson, from Parrish, FL
on 2/8/2008
Customer Rating:
Used these to attach a removable tabletop to a particle board Murphy Bed panel. They worked exactly as needed. A nice fastener.
6) Submitted by
Eric, from Orlando, FL
on 9/20/2007
Customer Rating:
Great quality product, easy to install, works as expected/advertised. Used in conjunction with part number 24315, combination leg equalizer. Both parts fit together perfectly. Used both parts during fabrication of a (very large) Tiki bar, both parts can support a substantial weight. Would recommend and use again.
7) Submitted by
Plunket, from Washington, DC
on 11/17/2007
Customer Rating:
I'd have rated this product (68387) "excellent" except that I found the mounting screws provided to be inadequate --flat head #4 - 3/4". They pulled right up out of the pressure-treated wood into which I was installing these tee nuts. I went to #6 oval head, 1" full length thread and have a connection worthy of this teenut's strength.
"Your products always seem to be of a sound quality every time I have ordered from Rockler. Quality levels of the items sold at Rocker are not like the tooling sold in discount houses. " -
Jack Fitzgerald
- 12/02/2009 See more...
CART
