Related Products
|
- Overview
- More Info
- Reviews
Rockler rabbeting router bit includes bit and bearings for 5/16'', 3/8'', 7/16'' and 1/2'' rabbets. Allen wrench included. Vary cutting depth by changing bearings.
 |
 |
| ROUTER
BIT DIMENSIONS |
 Two
flutes, Ball bearing guide. |
| Item
No. |
A |
B |
C |
D |
Bearing |
| 91584 |
1-3/8" |
1/2" |
1/4" |
1-1/4" |
3/8,
1/2, 5/8, 3/4 |
| 91595 |
1-3/8" |
1/2" |
1/2" |
1-1/2" |
3/8,
1/2, 5/8, 3/4 |
|
Made
with K10 and K20 grade carbide for clean cutting action and
final sharpened with 400 grit diamond wheels for longer cutting
life. Available in 1/4'' or 1/2'' shanks. Both with 1/2'' cutting
depth. Includes bit and bearing soft 5/16'', 3/8'', 7/16'' and
1/2'' rabbets for variable cutting depth. Allen wrench included.
A
fantastic value on high quality router bits. These bits are
competitively priced while offering high performance and long
life.
Quality performance features include:
- K10
and K20 grade carbide for clean cutting action.
- Final
sharpening with 600 - 800 grit diamond wheels.
- Precision
balanced for smooth operation.
- Baked-on
anti-stick coating to reduce pitch and resin buildup.
 If
you are not 100% satisfied with these bits, send them back for
a refund.
|
|
 |
|
 These
larger bits are designed to be used in a router
table.
Router Bit Set-Up Jigs - Set your
router bit to the precise height every time! Simply bring the router bit up through
the table and align the jig with the cutting edge of the bit.
Router
Safety Tips:
It's easy to prevent mishaps if you take a few simple precautions.
1) Rockler recommends using 1/2'' shank router bits whenever possible.
1/2'' shanks provide better stability with less vibration to produce a smoother
cut and longer cutter life.
2) Make multiple light passes rather than one heavy cut.
3) Install your router bit so that 90% of the shank is inside the
collet. Here's a rule of thumb: fully insert the bit, then pull it back
1/16 to 1/8 of an inch.
4) Use a router table whenever possible.
5) When using large diameter bits, reduce the RPM of your router.
Then test your set-up on scrap lumber.
6) Always follow your router manufacturer's recommendations. |
|
| |
 |
|
Customer Reviews and Photos for:
Rabbeting Router Bits
|
Average Rating:
(4.6)
(11 customer reviews)
Add your review...
|
|
|
1) Submitted by
J. H. Hannigan Const. Co. Inc,,, from Stony Point, NY
on 1/24/2010
Customer Rating: 
I purchased this rabbeting bit #91584 to make a pattern of a stone to inset in a side table. to cut a 1/2" rabbet I used the 3/8" then the 7/16" then the 1/2" this was to make light cuts. It did an excellent job.
|
|
2) Submitted by
Garry Buchanan, from Hughes Springs, TX
on 3/8/2009
Customer Rating:
Works like I expect all the pruducts from Rockler to be.
|
|
3) Submitted by
John Harkness, from Teton Village, WY
on 11/15/2008
Customer Rating: 
Clean, smooth cuts even when climb cutting red oak.
|
|
4) Submitted by
John Rhoades, from Los Angeles, CA
on 10/27/2008
Customer Rating:
Worked very well, glad I bought it.
|
|
5) Submitted by
Joe Ciotti, from Mohnton, PA
on 4/14/2008
Customer Rating:
Just what the doctor ordered! Smooth Cuts!
|
|
6) Submitted by
Anthony F DeVito, from Stow, MA
on 2/5/2008
Customer Rating:
Worked very well in Hard maple.
|
|
7) Submitted by
Stephen Kuhn, from Signal Mountain, TN
on 1/26/2008
Customer Rating:
Good price, easy to change bearings, sharp & accurate cuts. Lives up to the other reviewers' comments.
|
See all
11 reviews...
|
Home  Power Tools and Shop Accessories Routers and Accessories Router Bits Straight and Rabbeting Router Bits Rabbeting Router Bits
|
|
CART
