Stile and rail router bits for beautifully crafted frames. Rockler stile and rail bit sets are manufactured to exacting standards and create perfectly matched cope and stick joints.
ROUTER
BIT DIMENSIONS
Two
flutes, Ball bearing guide * Bearing 5/8"
Item
No.
A
B
C
D
91991
1-3/8"
1"
1/2"
1-1/2"
Top
quality bits that meet the high demands of Rockler Woodworking
and Hardware. A fantastic value on high quality router bits.
These bits are competitively priced while offering high performance
and long life.
Quality performance features include:
K10 and K20
grade carbide for clean cutting action.
Final
sharpening with 600 - 800 grit diamond wheels.
Precision
balanced for smooth operation.
Baked-on
anti-stick coating to reduce pitch and resin buildup.
Get
a great deal on these superior bits!
Buy 3 or more and get 10% off, or buy 6 or more and get 15% off.
If
you are not 100% satisfied with these bits, send them back for
a refund.
These
larger bits are designed to be used in a router
table.
Router Bit Set-Up Jigs - Set your
router bit to the precise height every time! Simply bring the router bit up through
the table and align the jig with the cutting edge of the bit.
Router
Safety Tips:
It's easy to prevent mishaps if you take a few simple precautions.
1) Rockler recommends using 1/2'' shank router bits whenever possible.
1/2'' shanks provide better stability with less vibration to produce a smoother
cut and longer cutter life. 2) Make multiple light passes rather than one heavy cut. 3) Install your router bit so that 90% of the shank is inside the
collet. Here's a rule of thumb: fully insert the bit, then pull it back
1/16 to 1/8 of an inch. 4) Use a router table whenever possible. 5) When using large diameter bits, reduce the RPM of your router.
Then test your set-up on scrap lumber. 6) Always follow your router manufacturer's recommendations.
1) Submitted by
O. Crandell, from Loomis, CA
on 10/7/2009
Customer Rating:
This was my first set of rail and stile bits and I am not disappointed. The contour of the two bits are identical and they produce good close fitting parts. I purchased the setup block and had no problem setting up the bits. Good addition to my tool set.
2) Submitted by
T. Thiesse from VA
on 1/19/2009
Customer Rating:
These bits make great joints with no gaps or play. These bits are also much quieter than my other sets. The optional set up jig is well worth the money.
3) Submitted by
Ben Weber, from San Antonio, TX
on 7/13/2008
Customer Rating:
Bits cut well. Problem with these bits are the 1" height to reach the bearing - a problem if you want to do curved rails on common 3/4" stock.
Editor's note. When cutting straight pieces one will use the fence on a router table as a guide rather than the bits bearing. When cutting curved rails for an arched door one will run the bit's bearing against the arched template one is using for the door top.
4) Submitted by
Dennis Connolly, from Brandon, FL
on 10/16/2007
Customer Rating:
This product performs very well. It makes good fitting doors. The only down side is that they do not come in a box to protect them from rubbing together
"JUST CANT BEAT THE SHIPPING SPEED! AMAZINGLY FAST . THIS STORE HAS EVERYTHING YOU CANT FIND ANYWHERE ELSE . DONT GO ANYWHERE ROCKLER, WE ALL NEED YOU! THANK YOU FOR THE GREAT SERVICE." -
Rick
- 12/15/2008 See more...
CART
Two
flutes, Ball bearing guide * Bearing 5/8"
Get
a great deal on these superior bits!
If
you are not 100% satisfied with these bits, send them back for
a refund. 
These
larger bits are designed to be used in a 
